Page 18 of 36

Re: The latest member of the family

Posted: 11 Feb 2025 13:55
by rubber_jonnie
OK, so the 48 pin sockets are here, so I'll get those installed later. I have another 40 pin socket to do as well, but that's the ROM and as I want to continue to use DiagROM I will leave that socket to the very end when I no longer want to use the Boo Bip ROM emulators as I don't want to mess up the new socket with round pins.

I think the plan is going to be to upgrade to 1MB on board if the replacement Agnus makes no difference and just stick an RTC in there.

It's less relevant now I have 8MB on the upgrade board.

Re: The latest member of the family

Posted: 11 Feb 2025 13:58
by rubber_jonnie
stephen_usher wrote: 11 Feb 2025 13:45 Unless you change the jumper on the motherboard the trapdoor RAM won't be Chip RAM but "Slow" RAM.
Indeed but as I said, if changing Agnus doesn't fix the trapdoor RAM issue, I'll add another 0.5MB onto the mainboard, it's less of an issue now I have 8MB chip RAM plus the existing .5MB of chip RAM.

I'm not going to waste any more time on the trapdoor and I'll just use it for an RTC if that's what's needed.

Of course I also need to set up a boot drive too now I have IDE that doesn't need drivers :)

Re: The latest member of the family

Posted: 11 Feb 2025 16:33
by alexh
rubber_jonnie wrote: 11 Feb 2025 13:58 it's less of an issue now I have 8MB Fast RAM plus the existing .5MB of chip RAM.
There will be one or two demo's that require 1MB of Chip RAM but they will be very few. Same goes for WHDload games.

Re: The latest member of the family

Posted: 11 Feb 2025 16:41
by rubber_jonnie
alexh wrote: 11 Feb 2025 16:33
rubber_jonnie wrote: 11 Feb 2025 13:58 it's less of an issue now I have 8MB Fast RAM plus the existing .5MB of chip RAM.
There will be one or two demo's that require 1MB of Chip RAM but they will be very few. Same goes for WHDload games.
Cool, thanks for the info.

Re: The latest member of the family

Posted: 12 Feb 2025 09:32
by rubber_jonnie
Annoyingly, it looks like Fat Agnus will be arriving tomorrow, I was hoping to have my answers today :(

Re: The latest member of the family

Posted: 12 Feb 2025 09:47
by stephen_usher
Waiting for stuff to arrive is really annoying.

Re: The latest member of the family

Posted: 12 Feb 2025 10:27
by rubber_jonnie
stephen_usher wrote: 12 Feb 2025 09:47 Waiting for stuff to arrive is really annoying.
It really is.

Re: The latest member of the family

Posted: 12 Feb 2025 11:10
by HigashiJun
rubber_jonnie wrote: 12 Feb 2025 10:27
stephen_usher wrote: 12 Feb 2025 09:47 Waiting for stuff to arrive is really annoying.
It really is.
+1

Re: The latest member of the family

Posted: 12 Feb 2025 14:39
by rubber_jonnie
Postman has just been, and I'm stuck in a work call...

Probably nothing for me but you never know.

Just ordered a CF to laptop IDE adapter so once I get things figured out I can get something connected to the new IDE adapter :)

Re: The latest member of the family

Posted: 12 Feb 2025 15:04
by rubber_jonnie
Rubbish, nothing for me...