Page 17 of 23

Re: Whoops I did it again - Sega Saturn inbound

Posted: 11 Nov 2023 11:09
by PhilC
rubber_jonnie wrote: 11 Nov 2023 10:35
PhilC wrote: 11 Nov 2023 10:27

Mine will be Monday but then you are so much nearer than I am :lol:
What's annoying is that it's just down the road at Chelmsford right now, I could literally go and pick it up and be home in an hour...

:dizzy:
It’s got another couple of hours on the road before it’s make it up here.

I shall be looking forward to your installation guide later on then :D

Re: Whoops I did it again - Sega Saturn inbound

Posted: 11 Nov 2023 14:35
by Higgy
If think you guys have a Saturn Memory cart with Pseudo Saturn Kai, you can use it with the Fenrir to give more options:

https://ppcenter.webou.net/pskai/

Re: Whoops I did it again - Sega Saturn inbound

Posted: 11 Nov 2023 15:03
by rubber_jonnie
PhilC wrote: 11 Nov 2023 11:09
rubber_jonnie wrote: 11 Nov 2023 10:35

What's annoying is that it's just down the road at Chelmsford right now, I could literally go and pick it up and be home in an hour...

:dizzy:
It’s got another couple of hours on the road before it’s make it up here.

I shall be looking forward to your installation guide later on then :D
I don't think there is a lot to the fitting guide, and who goes first is dependent on the post and time to fit it :)

Re: Whoops I did it again - Sega Saturn inbound

Posted: 11 Nov 2023 15:05
by rubber_jonnie
Higgy wrote: 11 Nov 2023 14:35 If think you guys have a Saturn Memory cart with Pseudo Saturn Kai, you can use it with the Fenrir to give more options:

https://ppcenter.webou.net/pskai/
Mmmm cool, I have a PSK, looks interesting :)

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 10:19
by rubber_jonnie
@PhilC Looks like my Fenrir is out for delivery :)

Maybe you'll get yours soon too.

EDIT: It just arrived, must leave it to warm up in my workroom before I play with it.

PXL_20231113_102330793.jpg

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 10:51
by alexh
Nice. I would have liked one (or a Rhea to match my GDEMU) but I could not justify ~£130

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 11:00
by rubber_jonnie
alexh wrote: 13 Nov 2023 10:51 Nice. I would have liked one (or a Rhea to match my GDEMU) but I could not justify ~£130
I'm quite glad I have a Dreamcast that will use burned disks, as whilst I'd like a GD-EMU, I can't justify both at the moment, especially whilst the DC is still fully working.

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 11:02
by PhilC
@rubber_jonnie yeah mine is supposed to be here any time now.

Check Ali express for the dreamcast one, that's where I got mine from very cheaply (altho 2 years ago)

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 11:03
by rubber_jonnie
PhilC wrote: 13 Nov 2023 11:02 @rubber_jonnie yeah mine is supposed to be here any time now.

Check Ali express for the dreamcast one, that's where I got mine from very cheaply (altho 2 years ago)
That's where I have been looking, perhaps for Xmas :)

BTW the Fenrir has gone up about £8 since we ordered.

Re: Whoops I did it again - Sega Saturn inbound

Posted: 13 Nov 2023 11:55
by rubber_jonnie
Ok, first steps of fitting:

PXL_20231113_112025384.jpg

I removed the original CD drive from the Saturn and took 2 out of the 4 rubber mounts out and fitted them to the Fenrir.

I think getting the 2 rubber mounts into the Fenrir board is probably the hardest par of all!!!

Next I selected one of the 2 cables provided, there is a 20 pin and a 21 pin in the box:

PXL_20231113_112550954.jpg

For my particular Saturn, I needed the 21 pin cable.

I then connected the ribbon at both ends, the only gotchas being to make sure the ribbon matches the connectors, and the fact that the mainboard side is quite recessed and can be a fiddle.

PXL_20231113_112717045.jpg

Then I hooked up the other cable and:

PXL_20231113_113059845.jpg

So cool, let's try with an SD card, and boom!!

PXL_20231113_113817027.jpg

There we go. Such a simple install and 100% working out of the box just fine with BIN files, though it will work with lots of other file formats.

I just need to drop all my files onto the SD card and reassemble the Saturn. I think I will look for a kit to move the position as when the lid is on, it leaves a big enough space to either lose your SD card, or store a small picnic:


PXL_20231113_113237781.jpg

And it seems to work just fine with the PSK cartridge :)

All in all a welcome and easily installed upgrade.