Page 16 of 24
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 31 May 2020 08:30
by terriblefire
terriblefire wrote: 29 May 2020 21:40
However if anyone (on the list) in the UK just wants bare boards i'll be happy to post those out without AS bags.
Hi,
Will get bare boards, so no need AS bag :)
Cheers,
-8 Bit Dreams
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 31 May 2020 08:34
by Subzero79
Can pay you because im going to have a surgical operation on my thorax?
Pay you send you adress and when im back i take it
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 31 May 2020 11:33
by terriblefire
Subzero79 wrote: 31 May 2020 08:34
Can pay you because im going to have a surgical operation on my thorax?
Pay you send you adress and when im back i take it
I'll post and you can pay me when you're recovered.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 01 Jun 2020 14:22
by arkadiusz.makarenko
Received my board today :)
I really like idea of assembled boards.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 11:55
by terriblefire
Antistatic bags are here. Will resume.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 12:07
by PaulJ_2.0
I have a complaint!
I found a loose 0603 cap in the package and have spent far too long confirming it didn't come from my boards.
Happy hunting guys!! :D
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 12:18
by terriblefire
PaulJ_2.0 wrote: 02 Jun 2020 12:07
I have a complaint!
I found a loose 0603 cap in the package and have spent far too long confirming it didn't come from my boards.
Happy hunting guys!! :D
Yikes.. Sorry! Glad its all got to you ok though. And not gone to the other address like last time.
Its difficult to simultaneously package a reasonable amount and make it fit in the postbox. :/
Normally i'd box these up for larger quantities.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 12:24
by PaulJ_2.0
terriblefire wrote: 02 Jun 2020 12:18
Yikes.. Sorry! Glad its all got to you ok though. And not gone to the other address like last time.
Its difficult to simultaneously package a reasonable amount and make it fit in the postbox. :/
Normally i'd box these up for larger quantities.
They were nicely packaged, no problems at all.
That loose cap did cause me to check them over multiple times and then a few more :D
Still, gave me something to do whilst I wait for the CPU's to arrive.
Cheers Stephen, they look really good.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 12:28
by PaulJ_2.0
Oh I forgot to ask the other day.
I have quite a few (dozens) MT48LC16M16A2 -75 that I've had for ages, is the -75 going to cause problems?
I put them onto my rev2 prototype and they seem to be performing ok, but I've not pushed it.
Re: TF536 Bulk Order (Batch 1 Closed)
Posted: 02 Jun 2020 12:29
by terriblefire
Ok i've gone and allocated Pre-assembled and Bare on a spreadsheet.
If you ordered 1 or 2 boards you will get all pre-assembled (unless you specified a preference).
Everyone else will get 1 bare board. + the remaining count in pre-assembled. works out perfectly.