Re: Project: HDMI/DVI out for STFM
Posted: 30 Aug 2018 13:02
For those who couldn't see the photo before, sorry about the delay. Here it is again.
Just need to find a HDMI cable now :pullhair:
We welcome retro users & hardware gurus alike! Come and join the party :)
https://www.exxosforum.co.uk/forum/
Its just staying red... my monitor screen flickers when I power on the ST, but does nothing else.. I will see if my multisync monitor has hdmi input...troed wrote: 30 Aug 2018 18:08 There's a LED on the underside of the blue board, facing the DVI connector. You can see the LED's reflection in the connector. If it's steady red, it means the FPGA is picking up the expected 160256 cycles for each VSYNC. If it's flashing it means it isn't (which might mean the computer is doing something it shouldn't).
Check HALT on your CPU as well if you get no picture on another screen as well. Steady red means the GLUE is doing it's job at least.exxos wrote: 30 Aug 2018 18:17 Its just staying red... my monitor screen flickers when I power on the ST, but does nothing else.. I will see if my multisync monitor has hdmi input...
ST is running.. its loading stuff from the floppy...troed wrote: 30 Aug 2018 18:32 Check HALT on your CPU as well if you get no picture on another screen as well. Steady red means the GLUE is doing it's job at least.