exxos wrote: 13 Sep 2019 15:40
Maybe Icky can do a ST case revision which is 15" high :D :D
Well its not like he doesn't have a 3d printer large enough. He could print a house to put the 15" high ST in!!
:)
Why stop there may as well print a castle
Re: Flashy Clock - Yet another DEV board
Posted: 01 Oct 2019 22:19
by Icky
Got distracted with many other projects and have now swung back round to the v3. Have got all the parts to build up three boards so will do so over the coming days.
We need to add in the firmware to select the ROM bank to boot from. This way it can all be done via software, no more jumpers to select the ROM bank.
With these new boards we start more testing.
Re: Flashy Clock - Yet another DEV board
Posted: 01 Oct 2019 23:17
by PaulJ
:excited: :excited: :excited:
Going to go good with the H4!
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 10:43
by Icky
Sunday morning prepping for building 3x Flashy Clock v3 boards. I just noticed in the photo one of the resistors is trying to escape.
IMG_4438.jpg
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 10:44
by exxos
Icky wrote: 06 Oct 2019 10:43
Sunday morning prepping for building 3x Flashy Clock v3 boards.
:cheer: :cheer: :cheer:
Icky wrote: 06 Oct 2019 10:43
I just noticed in the photo one of the resistors is trying to escape.
They do that.. gotta watch um.. little blighters...
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 11:15
by PhilC
It wouldn't be a Sunday without a dev board build.
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 14:46
by Icky
Ready for the reflow oven.
IMG_4441.jpg
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 17:14
by exxos
:excited: :excited: :excited:
Re: Flashy Clock - Yet another DEV board
Posted: 06 Oct 2019 17:15
by PhilC
exxos wrote: 06 Oct 2019 17:14
:excited: :excited: :excited:
:excited: :excited: :excited:
Re: Flashy Clock - Yet another DEV board
Posted: 07 Nov 2019 13:01
by exxos
I still need to catch up on this, but likely be a couple more weeks before I can get back to this :(
Though this shows the "stack" with the alt-ram board plugged in. Won't exactly be like this, but gives the idea. The CPU will plug on top of the stack.
fca.jpg
I have also noticed that someone didn't center the 4 pin header on the flashy pcb ;)