Page 13 of 94

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 14 Nov 2019 22:38
by PhilC
Hows the Mega look now?

I have an led uv lamp I am going to try for a few days on the keys and see what happens. The case itself was just dirty.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 14 Nov 2019 22:48
by TimNaber
I forget that the weather in England is like the weather in San Francisco.

A quote attributed to Mark Twain, " The coldest winter I ever spent was a summer in San Francisco!"
(the quote is not actually in any of his writings or interviews)

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 14 Nov 2019 23:06
by stephen_usher
PhilC wrote: 14 Nov 2019 21:07 Don't tell the missus but I can finally cross another computer off the wanted list.

This turned up in the post today.
20191114_205810.jpg

Of course it looked a whole lot worse when it arrived. It resembled something taken from a dumpster. Just the F3 key to find and then of course the mandatory accelerator, network adaptor, etc. The keys need a good retrobrite which I've never tried before.

Left on the list to find now is an Atari TT, an Enterprise, Sinclair QL and a Memotech MTX512.
Nice... Now to get a nice trapdoor accelerator for it?

As for the other machines... Well, I have all those except for the Enterprise, and all from when they were originally on sale. :-)
(OK, my Memotech was technically an MTX500 but hey.)

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 21 Nov 2019 11:04
by IngoQ
As an UV source for bad weather I can recommend the "Osram Ultra-Vitalux 300W".

https://www.osram.com/ecat/ULTRA-VITALU ... ZMP_60829/

This thing is extremely strong and produces enough warmth to speed up the process, depending on the distance.

But you should never get your hands under it when it is turned on, you will get a sunburn almost immediately.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 21 Nov 2019 18:16
by PhilC
I've hot myself an LED uv strip, so will report back on that at some point. Hopefully no skin cancer involved.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 11 Dec 2019 21:16
by PhilC
Hoping there's not going to be an earthquake this side of Christmas.
20191211_211459.jpg

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 11 Dec 2019 21:24
by exxos
PhilC wrote: 11 Dec 2019 21:16 Hoping there's not going to be an earthquake this side of Christmas.
Or unattended pets ;)

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 11 Dec 2019 21:34
by Icky
exxos wrote: 11 Dec 2019 21:24
PhilC wrote: 11 Dec 2019 21:16 Hoping there's not going to be an earthquake this side of Christmas.
Or unattended pets ;)
Or a boiler explosion :)

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 11 Dec 2019 22:05
by PhilC
Both valid risks, especially the unattended pets one, these two pups of ours have springs for feet.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 07 Jan 2020 16:20
by PhilC
Not had much chance to work on my H4 board lately due to work and family commitments but hopefully I will get a bit more time over the next couple of weeks.

In other news, I got sent a logic analyser by @Icky which I found incredibly useful but a bit limiting with only 8 channels *not being ungrateful at all thanks Icky ). So this turned up today.
20200107_160148.jpg
80 channel, 2ghz etc etc, bit over the top yes and far from portable as its name states but I'm looking forward to working out how to use it.

Gotta do something with this fan though, sounds like a jet engine.