Page 104 of 172

Re: Raven. A homemade Atari-like computer

Posted: 03 Aug 2025 16:40
by PhilC
agranlund wrote: 03 Aug 2025 16:37
PhilC wrote: 03 Aug 2025 16:30 I probably would use the floppy drive as well as I have loads of HD disks.
But does your case even have drive bays? :D
And therein lies the problem. I have a cooler master qube500, so I could rig up something externally though.

Re: Raven. A homemade Atari-like computer

Posted: 03 Aug 2025 18:31
by luciodra
Emutos 1.4 is also out... :D

Re: Raven. A homemade Atari-like computer

Posted: 03 Aug 2025 19:15
by Oldskool
If the case does not have drive bay you could use a usb connector with a gotek maybe and flashfloppy. Not real floppies then. But do you really want real floppies……

Re: Raven. A homemade Atari-like computer

Posted: 04 Aug 2025 06:09
by Tbs123456
https://www.thingiverse.com/thing:1279411

Or just 3d print a drive bay adapter for the floppy/gotek drive.

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 10:11
by agranlund
Oldskool wrote: 03 Aug 2025 19:15 But do you really want real floppies……
Not really :)

I do want to make the floppy driver for the enjoyment of making it, but I don't really have much need or want to use such driver.
(which, to be fair, can be said for almost everything I code on my spare time)

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 10:24
by agranlund
I spent yesterday evening disassembling the Nova driver to see if there is a somewhat clean cut between hardware driver and its VDI part.

Turns out yes!
(almost, but for my purpose good enough)

STA_VDI.PRG is, as the name implies, the VDI implementation and is near enough card agnostic. It mostly talks to emulator.prg for doing hardware stuff.
EMULATOR.PRG, despite its funny name, can be described as the hardware device driver.

With these very good news, and armed with a bit of understanding of how it works, I decided to go ahead with making a generic unaccelerated Nova VGA driver.
I think it'll be really nice to have a better fallback than the current mono situation when using card which don't have bespoke drivers.

Here's a _very_ quick and dirty proof-of-concept from yesterday.
Using my own made EMULATOR.PRG together with the original and unmodified STA_VDI.PRG from the ET4000 package.

The card here was some random Cirrus Logic I grabbed from my stash-of-cards but it'll probably work with anything that is VGA compatible, or that's the idea anyway.
I have a whole bunch of different brands and models to play with as I develop this into something proper.

nova_generic_driver.jpg
nova_generic_driver.jpg (58.38 KiB) Viewed 981 times

(This driver will be specific for Raven and without any consideration or support for other ISA equipped Ataris - it takes advantage of the fact that Raven can run the cards own vgabios to have them initialize themselves)

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 10:26
by dml
Very cool!!!!!! :p

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 10:49
by PhilC
That's spme great news, meaning we don't have to rely on obtaining the et4000 chips and can go for something comparable or even better.

I saw some gl-5436 on eBay IIRC and already have at least one S3 card somewhere

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 12:06
by agranlund
@PhilC
Yeah I think it'll be a great benefit to be able to plug in any old card and get a decent experience!

The official Nova drivers are of course the better choice, especially the accelerated ones.
For now I see this as being the worst-case fallback driver. A bit like how it is/was on Windows where its built-in generic VGA driver worked with every card but you wanted to install the better, and usually accelerated, bespoke driver at first chance anyway :)


I have some ideas of how I'd like to structure support for optional accelerant drivers. Most/all of the late ISA cards have hardware blitter and I suspect it would be a great deal of fun to try and get one of them working sometime later on. In my head, the structure could end up looking somewhat like this;

EMULATOR.PRG : the base vga device driver
STA_VDI.PRG : stock from ET4000 package, provides the unaccelerated VDI.
ACCEL.PRG : optional accelerant (hooks VDI to overload or steal certain functions from STA_VDI)

Re: Raven. A homemade Atari-like computer

Posted: 06 Aug 2025 12:21
by luciodra
agranlund wrote: 06 Aug 2025 12:06
EMULATOR.PRG : the base vga device driver
I would like to ask a question that stems from my technical limitation regarding Atari: shouldn't emulator.prg 'redirect' the Atari video signal to the ET4000 video card?