Page 2 of 2

Re: CT63 is coming back, is there still demand?

Posted: 21 Nov 2026 09:33
by exxos
mikro wrote: 21 Nov 2026 07:28
exxos wrote: 21 Nov 2026 03:21 Could you check with a meter that every pin the CT60 uses goes straight through the NOVA from bottom to top?
Of course it does, no signal is cut, it's 1:1 mapping of all header pins.
On the pass-through, was that checked with a meter or is it going by the design? I'd expect it to be straight through as well, but as nobody has got to the bottom of this in all these years, I'd rather rule things out properly than assume.

The question I'd really like answered is whether the NOVA ends its cycles with EDTACK. If it does, that would explain a lot, because the CT60 takes its acknowledge from U63 pin 8 and would never see the NOVA's EDTACK. Does a schematic for the NOVA exist? If so, checking what drives pin 8 on the expansion connector would answer it.