exxos's Atari, Amiga & retro forum

Yep. As said above, there are a few fixes for rev A3. Rev B1 other than the missing hole, I don't know or have found anything else which needs fixing yet.

@DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous. :lol:

officer960 wrote: 12 Dec 2020 17:07 @DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous. :lol:

I'm also not very good at soldering SMDs. I was successful this time using a soldering iron (no heat gun) with a very fine tip, and Kapton tape to hold the component. Also, those are the first things I soldered in the board, so I could have plenty of space to go around, in different angles, with the iron.