Page 2 of 2
Re: Chinese 060 Sockets any good?
Posted: 18 Mar 2020 18:14
by chucky
I managed to buy 10 pullers a while ago from ebay.. gave my last (except that one I am using) to TF! :)
Re: Chinese 060 Sockets any good?
Posted: 18 Mar 2020 18:27
by DoG
You can get 10-packs of these from Mouser, Farnell or Digikey. It doesn't seem that they have them in stock though.
Re: Chinese 060 Sockets any good?
Posted: 25 Mar 2020 11:27
by Higgy
Anyone have any luck in finding something? Or made some ghetto tool to do the job.
I hopefully soon will need to extract a PGA and I don't want to fudge it up! Not bothered marking the socket so if small blades screwdrivers will do the job I will try that.
Probably getting some forced unpaid leave soon so will have time to replicate a tool from metal/plastic!
Re: Chinese 060 Sockets any good?
Posted: 25 Mar 2020 12:39
by PaulJ_2.0
Sharp smd tweezers work fine, they are tapered and will naturally miss the pins if you push them in square.
Re: Chinese 060 Sockets any good?
Posted: 04 Apr 2020 02:02
by quantum8
Just make sure the tweezers are decent quality or your bend it.
I used a mobile phone spudger tool set I got from aliexpress which worked for me in removing an 040.