Page 2 of 68
Re: Icky - Progress
Posted: 18 Sep 2018 18:25
by PhilC
exxos wrote: 18 Sep 2018 18:18
Icky wrote: 18 Sep 2018 18:13
OK - Lets give it a go
Looks like BGACK hasn't a pull up either :roll: out of room on the RP's, so bodge resistor time...
Ah, the life of a guinea pig :D
Re: Icky - Progress
Posted: 18 Sep 2018 18:25
by exxos
So much fun to be had :P :lol: :twisted:
Re: Icky - Progress
Posted: 18 Sep 2018 19:17
by Icky
exxos wrote: 18 Sep 2018 18:25
So much fun to be had :P :lol: :twisted:
Great fun - just been hunting for 2.2k resistors in my parts bins. None to be found time to start desoldering some from that donor ST I have.
Re: Icky - Progress
Posted: 18 Sep 2018 19:18
by exxos
Icky wrote: 18 Sep 2018 19:17
Great fun - just been hunting for 2.2k resistors in my parts bins. None to be found time to start desoldering some from that donor ST I have.
4.7K, 10K should be ok as well...
Re: Icky - Progress
Posted: 18 Sep 2018 19:20
by troed
exxos wrote: 18 Sep 2018 19:18
Icky wrote: 18 Sep 2018 19:17
Great fun - just been hunting for 2.2k resistors in my parts bins. None to be found time to start desoldering some from that donor ST I have.
4.7K, 10K should be ok as well...
Get a SIL array from the donor - they're 10 or 4.7k
Re: Icky - Progress
Posted: 18 Sep 2018 19:34
by Icky
troed wrote: 18 Sep 2018 19:20
Get a SIL array from the donor - they're 10 or 4.7k
Ah ha - got one I had a spare 4.7k SIL in the Alpha parts pack
Re: Icky - Progress
Posted: 18 Sep 2018 19:54
by PhilC
Icky wrote: 18 Sep 2018 19:17
exxos wrote: 18 Sep 2018 18:25
So much fun to be had :P :lol: :twisted:
Great fun - just been hunting for 2.2k resistors in my parts bins. None to be found time to start desoldering some from that donor ST I have.
I'll have to engage /shoppingmode if Exxos carryies on. I havent got enough for every pin on the cpu :P
Re: Icky - Progress
Posted: 18 Sep 2018 19:57
by exxos
Forgottenmyname wrote: 18 Sep 2018 19:54
I'll have to engage /shoppingmode if Exxos carryies on. I havent got enough for every pin on the cpu :P
All others are fine :)
Re: Icky - Progress
Posted: 18 Sep 2018 19:57
by PhilC
exxos wrote: 18 Sep 2018 19:57
Forgottenmyname wrote: 18 Sep 2018 19:54
I'll have to engage /shoppingmode if Exxos carryies on. I havent got enough for every pin on the cpu :P
All others are fine :)
Just quoting you on that.... for the record like.....
Re: Icky - Progress
Posted: 18 Sep 2018 20:00
by exxos
Forgottenmyname wrote: 18 Sep 2018 19:57
Just quoting you on that.... for the record like.....
No problem :)
I've checked all around the CPU.. I mean really it should be booting up... Have to see if Icky has any luck...