You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Fixing my Milan 040 (or not) blog
Re: Fixing my Milan 040 (or not) blog
@exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards
If it ain't broke, test it to Destruction.
Re: Fixing my Milan 040 (or not) blog
Its a super IO, but not sure it deals with the PCI bus.PhilC wrote: Tue Jun 24, 2025 2:19 pm @exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards
Looks like keyboard, printer, serial, floppy, its on the ISA bus, so probably just a "built on" IO card I guess.
I just tried the S3 but no output. Would have thought the card would have given sync at least. But probably can't do much else until my new chips come
Re: Fixing my Milan 040 (or not) blog
@exxos it's probably failing to get as far as the bus initialisation because of the missing chips.
If it ain't broke, test it to Destruction.
Re: Fixing my Milan 040 (or not) blog
- 11111.jpg (52.88 KiB) Viewed 156 times
- IMG_3450.JPG (324.91 KiB) Viewed 156 times
-
SteveBagley
- Posts: 29
- Joined: Fri Jul 26, 2024 3:53 pm
Re: Fixing my Milan 040 (or not) blog
Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/
Steve
Steve
Re: Fixing my Milan 040 (or not) blog
cool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.phpSteveBagley wrote: Tue Jun 24, 2025 2:41 pm Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/
Looks like there's updated TOS as well...
Re: Fixing my Milan 040 (or not) blog
Very nice!
That screwdriver must have landed on the EEPROM in just the right way to reprogram it with the bootblock at the top and no OS!
BW
That screwdriver must have landed on the EEPROM in just the right way to reprogram it with the bootblock at the top and no OS!
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: Fixing my Milan 040 (or not) blog
Nice!! Great work!
Re: Fixing my Milan 040 (or not) blog
I get a single beep but no boot up. So not sure whats going on there. Will go back to the previous flash and try again...exxos wrote: Tue Jun 24, 2025 2:45 pmcool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.phpSteveBagley wrote: Tue Jun 24, 2025 2:41 pm Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/
Looks like there's updated TOS as well...