You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Newcomer arriving soon...

Blogs & guides and tales of woo by forum members.
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

Guess what I'm doing...

1.JPG
2.JPG

Have also my 74ALS244 and my 47Ω resistor ready.

There are still 4 chips to remove though...

8-)
You do not have the required permissions to view the files attached to this post.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14586
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Newcomer arriving soon...

Post by rubber_jonnie »

I'm guessing a TT RAM upgrade :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

Oh, how did you guess ?

:lol:
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

(But it is ST RAM here...)
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14586
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Newcomer arriving soon...

Post by rubber_jonnie »

HigashiJun wrote: 01 Apr 2026 11:57 (But it is ST RAM here...)
:dizzy:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

Yay, my 8MB upgrade is finally finished !

1.JPG
2.JPG

Now have to check if it works, but that will be for later...
You do not have the required permissions to view the files attached to this post.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14586
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Newcomer arriving soon...

Post by rubber_jonnie »

HigashiJun wrote: 04 Apr 2026 10:25 Yay, my 8MB upgrade is finally finished !


1.JPG


2.JPG


Now have to check if it works, but that will be for later...

Nice, fingers crossed for a good test later.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

Well, just tried and it doesn't work...

:(

I have garbage on the boot screen and nothing else.

Maybe the BNK5 stuff (pin 94 of MCU) and its related VNE connector B27 pin bodge are not needed ?

Have to investigate more...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14586
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Newcomer arriving soon...

Post by rubber_jonnie »

HigashiJun wrote: 05 Apr 2026 09:40 Well, just tried and it doesn't work...

:(

I have garbage on the boot screen and nothing else.

Maybe the BNK5 stuff (pin 94 of MCU) and its related VNE connector B27 pin bodge are not needed ?

Have to investigate more...
Ahh rubbish, I'm sure you'll fix it soon.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 2256
Joined: 19 Jun 2020 07:21
Location: Tokyo

Re: Newcomer arriving soon...

Post by HigashiJun »

I hope so.

Thanks.

Return to “MEMBER BLOGS”

Who is online

Users browsing this forum: Baidu [Spider], CCBot and 2 guests