You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

520 STFM 256kx4 DIL to 1Mx4 SOJ

Upgrade your RAM from ST to Falcon.
Post Reply
gman
Posts: 2
Joined: Thu Aug 01, 2019 9:48 am

Re: 520 STFM 256kx4 DIL to 1Mx4 SOJ

Post by gman »

exxos wrote: Thu Aug 01, 2019 12:23 pm
gman wrote: Thu Aug 01, 2019 12:19 pm 1: what's the resistor on the cable "manually connect A9 (pin 5) to the unused MMU pin 64."?
When you upgrade the RAM from say 1MB to 4MB you need a extra address wire, which is what A9 is. Basically without it, your new chips would be "stuck" with 1MB for example.
Thanks for the reply, Did I miss read your store page and you don't sell a 4MB RAM kit for this board?
This is pretty good info here, but having the correct parts and a more detailed guide would be great!
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 27532
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Re: 520 STFM 256kx4 DIL to 1Mx4 SOJ

Post by exxos »

gman wrote: Fri Aug 02, 2019 1:15 am Thanks for the reply, Did I miss read your store page and you don't sell a 4MB RAM kit for this board?
This is pretty good info here, but having the correct parts and a more detailed guide would be great!
I do not do a kit for 4MB kit for that board no.
Top
Post Reply

Return to “RAM UPGRADES”