in the TF330 the phase is fixed at 1 because the clock speed is fixed at 50mhz.
The code is here ...
https://github.com/hologenics/hg330/blo ... ocks.v#L38
However TF1260 fw versions have different raw phases for different tool PHASE values.
that's all the documentation i'm prepared for give.
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF1260 100Mhz 060 Rev 4 o'clock woes solved with PHASE
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1260 100Mhz 060 Rev 4 o'clock woes solved with PHASE
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 3 guests