exxos's DFB1 trials

[exxos]

@Badwolf Suggested a jumper for the flash for bank switching. So just added that in.

bs.PNG

[JezC]

@Badwolf Suggested a jumper for the flash for bank switching. So just added that in.

@Badwolf stop distracting @exxos or it will never get sent off!
:slapface: :smackbum:

[Badwolf]

@Badwolf Suggested a jumper for the flash for bank switching. So just added that in.

@Badwolf stop distracting @exxos or it will never get sent off!
:slapface: :smackbum:

Sorry about that :P

@exxos: it occurs to me that with a fixed SDRAM memory choice, you don't need the ALTRAM jumper -- you could repurpose that as the bank toggle, or relabel it OPTION2 for some futher choice down the line.

BW

[exxos]

@exxos: it occurs to me that with a fixed SDRAM memory choice, you don't need the ALTRAM jumper -- you could repurpose that as the bank toggle, or relabel it OPTION2 for some futher choice down the line.

Possibly.. or a altram disable jumper may be useful :shrug:

Though if my revision untimely goes in your GitHub then people may change stuff anyway. :shrug:

[exxos]

Finished the BOM . Had a bit of a fight with it all. The good thing is there is a script to export in JLC format. In eagle I had to write my own scripts to generate the BOM in the correct format. So good someone did a kicad script to do it.

[Badwolf]

Finished the BOM . Had a bit of a fight with it all. The good thing is there is a script to export in JLC format. In eagle I had to write my own scripts to generate the BOM in the correct format. So good someone did a kicad script to do it.

:bravo:

I think I may have made a proper BOM once for a board with only passives on it, but I never got very far with anything complicated! :)

BW

[exxos]

Things are officially done in the Pacman logo stamped on it 8-)

It has been sent off to the PCB company for a quotation. Probably be a couple of days or so before I hear back.

DFB1X.PNG

[exxos]

New boards arrived.. and with typical stuff goes randomly wrong, impact can't find my programmer now :pullhair:

Capture.PNG

[Badwolf]

Impact has *never* worked for me. I use xc3sprog.

BW

[exxos]

Impact has *never* worked for me. I use xc3sprog.

That always worked for me in till today. Though I was screwing around with all sorts of USB drivers when trying to get the pico drive to work properly. So something could have broke then :roll: