I'll check the previous version of the 1230 firmware on this one, as in his video it shows the 1230 doing the curtain effect with the old firmware.terriblefire wrote: 30 Oct 2021 19:02 I mean if these guys want to chase compatibility to this level then fair play to them. I'm only ever going to chase it to what WinUAE does.
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF1230 Compatibility
Moderators: terriblefire, Terriblefire Moderator
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF1230 Compatibility
-
terriblefire
- Admin sponsor

- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Compatibility
Ok i confirmed the Oxygene-Cuzco glitch is still there. I shall investigate.go0se wrote: 30 Oct 2021 19:04I'll check the previous version of the 1230 firmware on this one, as in his video it shows the 1230 doing the curtain effect with the old firmware.terriblefire wrote: 30 Oct 2021 19:02 I mean if these guys want to chase compatibility to this level then fair play to them. I'm only ever going to chase it to what WinUAE does.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF1230 Compatibility
Flashed the previous firmware, no curtain effect there either so assuming he is running a different version. Ignoring this one for now as the performance difference looks negligible anyhow.go0se wrote: 30 Oct 2021 19:04I'll check the previous version of the 1230 firmware on this one, as in his video it shows the 1230 doing the curtain effect with the old firmware.terriblefire wrote: 30 Oct 2021 19:02 I mean if these guys want to chase compatibility to this level then fair play to them. I'm only ever going to chase it to what WinUAE does.
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF1230 Compatibility
The menu music on SuperStarDustAGA now sounds much better than on the previous firmware. I can't tell if it is "perfect" as I have no experience of this game and limited musical ability :)
-
Higgy
- Posts: 488
- Joined: 23 Apr 2019 20:05
- Location: Somerset
Re: TF1230 Compatibility
Nice one on the fixes, sorry my Amiga's are all buttoned up and in their cases, so takes a bit more to strip out to flash.
Been more focusing on TF360/TF1260 demo bugs.
I wonder if we will get a ACA1260 Vs TF1260 version video :lol:
Been more focusing on TF360/TF1260 demo bugs.
I wonder if we will get a ACA1260 Vs TF1260 version video :lol:
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF1230 Compatibility
Hopefully!
Estrayk has done more testing on the TF1230 in that video that the all of the Beta testers combined. He deserves a mention on the next TF silkscreen for his valuable contribution if you ask me! :)
-
terriblefire
- Admin sponsor

- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Compatibility
Agreed!go0se wrote: 30 Oct 2021 21:28 Estrayk has done more testing on the TF1230 in that video that the all of the Beta testers combined. He deserves a mention on the next TF silkscreen for his valuable contribution if you ask me! :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PaulJ_2.0
- Posts: 571
- Joined: 11 May 2019 23:32
Re: TF1230 Compatibility
To be fair, I don't play demos.
I've never really understood why people do. I can see they are good within a scene but people just watching them for the sake of it, I don't get.
There seems to be no issues with my TF1230 use so far.
I've never really understood why people do. I can see they are good within a scene but people just watching them for the sake of it, I don't get.
There seems to be no issues with my TF1230 use so far.
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF1230 Compatibility
I've updated the test post earlier in the thread with some more results.
This one is interesting:
Drool This / Parallax : This one wasn't available in my WHDLoad demo archive so have used the version in Supaduper's upload. With the latest firmware, starts and runs then Gurus the machine about 5 seconds into rendering the "3D FPS room" section near the start of the demo. The same behaviour is shown in the video at 4:12. This one seems to run OK on WinUAE.
This one is interesting:
Drool This / Parallax : This one wasn't available in my WHDLoad demo archive so have used the version in Supaduper's upload. With the latest firmware, starts and runs then Gurus the machine about 5 seconds into rendering the "3D FPS room" section near the start of the demo. The same behaviour is shown in the video at 4:12. This one seems to run OK on WinUAE.
-
PaulJ_2.0
- Posts: 571
- Joined: 11 May 2019 23:32
Re: TF1230 Compatibility
I've applied the new firmware and my Rev 2B doesnt boot. I get the power light go bright and then it hangs.
Who is online
Users browsing this forum: CCBot and 3 guests