You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

STE V1.5 32MHz BOOSTER - STATUS

Help & information about the STE V1 series boosters.
User avatar
PhilC
Moderator
Moderator
Posts: 7370
Joined: 23 Mar 2018 20:22

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

It's the one that's incorrectly rotated that annoys me :mrgreen:
If it ain't broke, test it to Destruction.
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28094
Joined: 16 Aug 2017 23:19
Location: UK

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

Forgottenmyname wrote: 06 Aug 2018 17:46 It's the one that's incorrectly rotated that annoys me :mrgreen:
:thumbup:
Top
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7305
Joined: 13 Nov 2017 19:19
Location: Oxford, UK.

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by stephen_usher »

Forgottenmyname wrote: 06 Aug 2018 17:46 It's the one that's incorrectly rotated that annoys me :mrgreen:
Surely it's all but one is the wrong way around? ;-)
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7370
Joined: 23 Mar 2018 20:22

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

stephen_usher wrote: 06 Aug 2018 17:50
Forgottenmyname wrote: 06 Aug 2018 17:46 It's the one that's incorrectly rotated that annoys me :mrgreen:
Surely it's all but one is the wrong way around? ;-)
:lol: so that's why I found it annoying.
If it ain't broke, test it to Destruction.
Top
User avatar
IngoQ
Site Admin
Site Admin
Posts: 1073
Joined: 22 Aug 2017 08:38
Location: Germany

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by IngoQ »

I don't like the gap between 1st and 2nd of the middle row :-P
Ingo :geek:

| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28094
Joined: 16 Aug 2017 23:19
Location: UK

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

One thing I noticed the other day which I need to look at the bit more.. Was that HD10.01 driver crashed on boot up in 40MHz mode. I am not sure if anything else was loading in the AUTO folder.. I need to check will not had chance yet..

Basically when HD10 loaded it would bomb out. You'll thing is if I booted in 8MHz mode it would all load fine, and then the driver seemed to work fine in switching back to 40MHz mode. I emailed Uwe about it, he says it works on other machines like the Milan etc and that there is no timing dependent code in HD10..

So if any of you guys with this booster can try it out, really just load the driver from the floppy, and see if it bombs on boot or not.. I will try and do this myself bought I'm going to be busy today some other stuff..

EDIT:
The driver might actually loaded from my ultra Satan... Can't remember now :roll:
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7370
Joined: 23 Mar 2018 20:22

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

Will try and give it a go this weekend from Floppy.

I don't suppose you have a link to the file do you? Still an STe newb here.

I have an ultrasatan but only the correct cables for a Mega ST.
If it ain't broke, test it to Destruction.
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28094
Joined: 16 Aug 2017 23:19
Location: UK

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

Forgottenmyname wrote: 09 Aug 2018 20:22 I don't suppose you have a link to the file do you? Still an STe newb here.
HD10 isn't "free software" but there is a demo...

https://www.hddriver.net/en/demo.html
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28094
Joined: 16 Aug 2017 23:19
Location: UK

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

Going back to the images in my previous post https://www.exxosforum.co.uk/forum/viewt ... =220#p8057

There has been no progress with these over the past month :( So I am going to send them off to get the headers soldered onto them as I can't see myself getting time any time soon.
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7370
Joined: 23 Mar 2018 20:22

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

Well mine certainly seems to work ok. I'll put it on test again over the weekend.

I think you've got a good product you can sell just fine, just need to get it on the shelf.
If it ain't broke, test it to Destruction.
Top

Return to “STE V1 SERIES 32MHz BOOSTER”

Who is online

Users browsing this forum: CCBot and 0 guests