You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
flaco wrote: 27 Oct 2021 21:41
Hello,
I am interested in building my own TF1230 board, and after reading this whole post and others, I have two questions :
- is the hardware rev 2 still planned ?
Not at this time. Seems its working in almost every case. I had one stubborn case which i bought the A1200 from the user and it turned out to be a damaged motherboard.
flaco wrote: 27 Oct 2021 21:41
- is there a developer continuing the firmware development ? since few additional features might be possible and useful : maprom, RAM at ranger addresses, timed reset to switch features.... My RAM board installed in my 1200 actually have these, and I sometimes use them to boot newer kikstarts or old titles. Even if it requires a 288 CPLD.
Last but not least : thank you sir for all what you have done
No the features are locked as is. I will fix bugs as i find them.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Remember it has a No Derivatives license (that doesnt mean you cant experiment for personal fun). I will also accept bug fixes etc.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
I have a lot of V54C3256804VCT6 chips (https://www.digchip.com/datasheets/down ... 256804VCT6), these are 5.4ns/166Mhz 32MB each one, unfortunately the initialization requires 200us instead of 100us, I have looked at the sources uploaded to github but my TF1230 refuses to boot with it. With tf1230r1_2021_10_30_alpha it boots although no ram is recognized.
@terriblefire I was wondering if you could upload your latest firmware sources so I can increase the delay and see if the chips work. Or perhaps increasing it in the main branch doesn't affect the official memory chips.
Crumb wrote: 02 Jan 2022 17:30
I have a lot of V54C3256804VCT6 chips (https://www.digchip.com/datasheets/down ... 256804VCT6), these are 5.4ns/166Mhz 32MB each one, unfortunately the initialization requires 200us instead of 100us, I have looked at the sources uploaded to github but my TF1230 refuses to boot with it. With tf1230r1_2021_10_30_alpha it boots although no ram is recognized.
@terriblefire I was wondering if you could upload your latest firmware sources so I can increase the delay and see if the chips work. Or perhaps increasing it in the main branch doesn't affect the official memory chips.
Sorry but you are on your own here.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
