Hi @PhilC Sorry the @mention grabbed the wrong Phil. ;)
I will follow your lead. I have an Atari Floppy so I may skip the pullups. Floppy works fine now.
Was my stack of board/socket/tos decoder/socket/tf536 the same as yours?
TY for the hint of using the diag card with a 68K in the system first. I'll do that between steps!
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Tony's Random Atari Adventures
-
tony.reynolds
- Posts: 34
- Joined: 06 Apr 2020 03:54
Re: Tony's Random Atari Adventures
;Manually change to secret room.
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
-
PhilC
- Moderator
- Posts: 7383
- Joined: 23 Mar 2018 20:22
Re: Tony's Random Atari Adventures
@tony.reynolds yes the stack is how I did mine.
You'll need to connect the wire from the decoder board to the ce pin on the dual tos board.
You'll need to connect the wire from the decoder board to the ce pin on the dual tos board.
If it ain't broke, test it to Destruction.
-
tony.reynolds
- Posts: 34
- Joined: 06 Apr 2020 03:54
Re: Tony's Random Atari Adventures
Right on, @PhilC
The attic is finally cool enough to work up there for about an hour.
This week:
The attic is finally cool enough to work up there for about an hour.
This week:
- I soldered on all the headers on my MiST HW. No sense in being caught out.
- I recapped the MegaST's P/S yesterday and I had great success. It was fine practice with the Hakko desolderer. I'll do some more work off my soldering list and desoldering list before I do the SIP resistor pack replacements on my MegaST board itself.
You do not have the required permissions to view the files attached to this post.
;Manually change to secret room.
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
Who is online
Users browsing this forum: CCBot and 44 guests