You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Please make sure you are logged in for at least 2 hours
to make sure your IP is added into the firewall whitelist, thanks :)

TF536 Bulk Order (Batch 1 Shipped)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Post Reply
JoeFloyd
Posts: 28
Joined: Fri May 08, 2020 11:08 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by JoeFloyd »

I have been looking for a reasonable source for the XC95288XL-10TQG144C.

A US based seller has a few for sale at $11 https://www.ebay.com/itm/233194476692

I've ordered a few and will try them out.

Joe
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5675
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

There continues to be an issue with the JLCPCB website. I'm actively getting support now though.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
Danoo
Posts: 250
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: TF536 Bulk Order (Batch 1 Closed)

Post by Danoo »

JoeFloyd wrote: Sun May 10, 2020 5:58 pm I have been looking for a reasonable source for the XC95288XL-10TQG144C.

A US based seller has a few for sale at $11 https://www.ebay.com/itm/233194476692
Hi Joe, nice find, just a quick note, it is the C variant of the chip, no biggy tho, just means the operating temperature tolerance is a little tighter(C: 0 to 70 I: -40 to 85 Degree-C). :)
Life is really simple, but we insist on making it complicated - Confucius
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5675
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

terriblefire wrote: Mon May 11, 2020 9:04 am There continues to be an issue with the JLCPCB website. I'm actively getting support now though.
So they limit 4 layer assembly to 30pcs but 2 layer to 50pcs. Which makes no damn sense to me.

At this point I will probably make 2 x 30 pcs orders of assembled and get the rest as bare pcbs? Does anyone have a preference about this?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
LADmachining
Posts: 41
Joined: Sun Mar 24, 2019 2:19 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by LADmachining »

terriblefire wrote: Mon May 11, 2020 10:00 am
So they limit 4 layer assembly to 30pcs but 2 layer to 50pcs. Which makes no damn sense to me.

At this point I will probably make 2 x 30 pcs orders of assembled and get the rest as bare pcbs? Does anyone have a preference about this?
It is nice to have a pre-assembled board, but not a deal-breaker for me if it is bare.
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7252
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order (Batch 1 Closed)

Post by PhilC »

I'd prefer assembled but just because I'm lazy :lol:

3 assembled, 3 bare would work if you need to spread them out a little more.
If it ain't broke, test it to Destruction.
Top
Danoo
Posts: 250
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: TF536 Bulk Order (Batch 1 Closed)

Post by Danoo »

terriblefire wrote: Mon May 11, 2020 10:00 am

At this point I will probably make 2 x 30 pcs orders of assembled and get the rest as bare pcbs? Does anyone have a preference about this?
A mixture of both would be nice, but I am not really fussed was just going to check-out what kind of quality JLCPCB produce with assembled boards.( Possibly 1 assembled, 2 bare )
Whatever is easiest for you terriblefire .
Life is really simple, but we insist on making it complicated - Confucius
Top
neilo40
Posts: 36
Joined: Fri May 08, 2020 10:47 am

Re: TF536 Bulk Order (Batch 1 Closed)

Post by neilo40 »

I have most of the passives lying around and as I only want a single board, have no issue taking an unpopulated one.
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5675
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order (Batch 1 Closed)

Post by terriblefire »

I'll get a mixed bag of them then ... really annoyed they dont do 50 pcs.. Seems a bit bloody minded to me.

EDIT: Its ordered. I have ordered 90 part-assembled boards and 75 bare boards. And boy was that an expensive PCB order.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1360
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF536 Bulk Order (Batch 1 Closed)

Post by arkadiusz.makarenko »

terriblefire wrote: Mon May 11, 2020 10:50 am I'll get a mixed bag of them then ... really annoyed they dont do 50 pcs.. Seems a bit bloody minded to me.

EDIT: Its ordered. I have ordered 90 part-assembled boards and 75 bare boards. And boy was that an expensive PCB order.
Will you have any surplus bare pcbs by any chance or is it all already reserved?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
Top
Post Reply

Return to “TF536”