You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Tom's attempt at the h4
-
exxos
- Site Admin
- Posts: 27948
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Tom's attempt at the h4
For the H4 ??
-
Tomswork
- Posts: 776
- Joined: 22 Nov 2019 22:05
Re: Tom's attempt at the h4
Oh no sorry for tesing a ste board I should not sleep post
I'm going through my boards to see what parts work for the h4
:roll:
I tried cartman to split the 256k version but no luck
Tom
I'm going through my boards to see what parts work for the h4
:roll:
I tried cartman to split the 256k version but no luck
Tom
-
exxos
- Site Admin
- Posts: 27948
- Joined: 16 Aug 2017 23:19
- Location: UK
-
Tomswork
- Posts: 776
- Joined: 22 Nov 2019 22:05
Re: Tom's attempt at the h4
Got my dma boards today setting out to put them together I will have to stop drinking coffee with these little smd parts
Tom
Tom
-
rubber_jonnie
- Site Admin
- Posts: 14383
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Tom's attempt at the h4
@Tomswork I use an emulator for ROM splitting. Just set up the ST variant you want with the ROM set you need to split, boot up and run ROMSPLIT and split into the number of parts you need. You're self sufficient once you get the hang of it.Tomswork wrote: 06 Mar 2020 00:50 Tos 1.62 us English roms does anyone have them split hi lo for the 27c010 chips. Is so could you email me a set
Tom
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
Tomswork
- Posts: 776
- Joined: 22 Nov 2019 22:05
Re: Tom's attempt at the h4
Thank you rubber_jonnie. I got the roms split and tested the boards little twitchy put not bad for as is sold as parts. So I have the parts for the h4
Tom
Tom
-
rubber_jonnie
- Site Admin
- Posts: 14383
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Tom's attempt at the h4
SplendidTomswork wrote: 13 Mar 2020 16:39 Thank you rubber_jonnie. I got the roms split and tested the boards little twitchy put not bad for as is sold as parts. So I have the parts for the h4
Tom
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: Tom's attempt at the h4
@Tomswork , reading your other thread about exhausting your H4 parts supply last evening. How about some pictures. Sounds like you may be getting close.
-
Tomswork
- Posts: 776
- Joined: 22 Nov 2019 22:05
Re: Tom's attempt at the h4
I will get some pics up soon. I have been fixing the weed eater and then the lawnmower kisses left the gas in them over winter errr oh well
Tom
Tom
-
Tomswork
- Posts: 776
- Joined: 22 Nov 2019 22:05
Re: Tom's attempt at the h4
Here is a picture of board one still waiting on the usps and mouser order
Tom
Tom
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: CCBot and 3 guests