You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Tf534 problem with IDE speed

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

I have 1mb chip ram
Now most games and demos start working
When I come back from work I'll check this mad professor
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 660
Joined: 08 Nov 2018 12:05

Re: Tf534 problem with IDE speed

Post by supaduper »

kulamario wrote: 23 Feb 2020 13:24 I have 1mb chip ram
Now most games and demos start working
When I come back from work I'll check this mad professor
Good stuff if Mad Professor Mariarti runs then you have cracked it, do not worry about Defender of the Crown 2 as this will be WHDload related not hardware related

Also regarding Settlers , there are lots of different WHDload versions and many have problems so have a search on the forums for a working one for your setup
terriblefire
Admin sponsor
Admin sponsor
Posts: 5678
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Tf534 problem with IDE speed

Post by terriblefire »

Sounds like you cracked it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

Lads if I buy 030 50mhz should work 50mhz on TF534?
alenppc
Moderator Team
Moderator Team
Posts: 932
Joined: 08 Nov 2018 12:59

Re: Tf534 problem with IDE speed

Post by alenppc »

kulamario wrote: 23 Feb 2020 16:24 Lads if I buy 030 50mhz should work 50mhz on TF534?
It's very unlikely that you'll be able to run at 50 mhz if you are using the spec'd 55ns ram. 40 is about the max you'll get out of those.
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

Memory what I use is
AS6C8008-55ZIN
it took me some time to check everything
And case looks like this
Not so many games work on whdload if some game already works it only for a moment and goes to workbench
But if I run games from gotek all games work perfect
So I think is something wrong is with my system
terriblefire
Admin sponsor
Admin sponsor
Posts: 5678
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Tf534 problem with IDE speed

Post by terriblefire »

You might need to set the no autovector stuff in WHDLoad.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

i setup already
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

What Classic WB you use?
And what kickstart you have?

I have 3.1 40.63 and Classic WB Full from my Amiga 1200 - now I install Litle we ill see
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: Tf534 problem with IDE speed

Post by kulamario »

I install classic WB version litle
Still have problems
Now even I have white screen
Dnt know what could be wrong
Please give me some advice
I add all my errors what I get
You do not have the required permissions to view the files attached to this post.

Return to “TF534 (OBSOLETE)”

Who is online

Users browsing this forum: CCBot and 55 guests