You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Please make sure you are logged in for at least 2 hours
to make sure your IP is added into the firewall whitelist, thanks :)

The TF1260 rev1 arrives!!! Oh boy!

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

Post Reply
terriblefire
Admin sponsor
Admin sponsor
Posts: 5675
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by terriblefire »

kulamario wrote: Tue Aug 18, 2020 5:49 pm
No. This time its restricted to the closer builder team. After my experience with the TF536 i wont be doing wide beta ever again.
You put some boards to exxos store ?
Not this time. I dont want the hassle of supporting ppeople. I dont think there are the volume of 060s out there to support this. I think this time you need to buy from @supaduper, @chucky, @go0se, @alenppc or @PhilC.

Ultimately it will be open source anyways so it can be built by anyone but my time is very limited right now and since the volumes are going to be low i might as well keep it to the guys i know will deal with their end users.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1360
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by arkadiusz.makarenko »

terriblefire wrote: Tue Aug 18, 2020 5:27 pm
kulamario wrote: Tue Aug 18, 2020 5:14 pm Very good news
I hope I'll be pcb's available for members
No.
;)
Attachments
4bvea4.jpg
4bvea4.jpg (44.5 KiB) Viewed 3661 times
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5675
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by terriblefire »

Because i always get asked "what has changed" here is a diff...
copper-top-filled.diff.png
copper-top-filled.diff.png (911.68 KiB) Viewed 3637 times
copper-bottom-filled.diff_bg.png
copper-bottom-filled.diff_bg.png (889.74 KiB) Viewed 3637 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
Danoo
Posts: 250
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by Danoo »

Very nice, have a few 060s in storage(not for sale), will certainly have my hand up when it gets to the release stage. I am over soldering for now, better things to do with my time, so purchasing a pre-assembled card from one of the builders works for myself.

Was looking at the warp1260 project but IMHO :hide: this is more of a vanilla flavour which I prefer for my collection
Life is really simple, but we insist on making it complicated - Confucius
Top
srosefx
Posts: 5
Joined: Thu Sep 03, 2020 10:09 am

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by srosefx »

Wow! I am always in awe of the work your doing Stephen, the boards are a work of art, it has given me the kick up the bum to finally go back and study electronics and engineering, im a little tired of not comprehending how the magician pulls the rabbit out of the hat.
Cant wait for these boards.
Simon
Top
Post Reply

Return to “TF360”