See my reviews for each Amiga model I've tested so farmatt020 wrote: 10 Jan 2020 13:56 Any feedback so far?
Have people received their boards? Has anyone been able to get one to boot up?
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Limited TF536 Run - Sort of Sales (All gone)
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Limited TF536 Run - Sort of Sales (All gone)
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
The boards have not reached me yet. They're still enroute from China.matt020 wrote: 10 Jan 2020 13:56 Any feedback so far?
Have people received their boards? Has anyone been able to get one to boot up?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
chucky
- Posts: 100
- Joined: 13 Jan 2019 20:42
Re: Limited TF536 Run - Sort of Sales (All gone)
today I soldered the 536 Stephen sent me AGES ago.
seems to work just fine here. will do some AIBB burnintests etc.
but the Grind demo works fine etc.
seems to work just fine here. will do some AIBB burnintests etc.
but the Grind demo works fine etc.
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
Finally @Chucky joins the game.chucky wrote: 11 Jan 2020 20:30 today I soldered the 536 Stephen sent me AGES ago.
seems to work just fine here. will do some AIBB burnintests etc.
but the Grind demo works fine etc.
Let us know how you get on with things. I think @alenppc had crashes looping the frontier demo after 20mins or so?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
chucky
- Posts: 100
- Joined: 13 Jan 2019 20:42
Re: Limited TF536 Run - Sort of Sales (All gone)
well I cannot runt frontier as my lab setup adapter is too big. but had a DOM with some stuff..
done several AIBB modules and running 030 demos that use alot of chunky2planar (grind!) under 1 1/2 hour with no issue at all..
all seems to run smoothly!
done several AIBB modules and running 030 demos that use alot of chunky2planar (grind!) under 1 1/2 hour with no issue at all..
all seems to run smoothly!
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: Limited TF536 Run - Sort of Sales (All gone)
Good job, everything crashes on my A500 unless I constantly spray the CPLD with the freezer spray on both cards I built. I don’t know what causes it.
-
chucky
- Posts: 100
- Joined: 13 Jan 2019 20:42
Re: Limited TF536 Run - Sort of Sales (All gone)
cpld is cooler than the 030 for me still runing demos etc all the time
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: Limited TF536 Run - Sort of Sales (All gone)
The funny thing is the CPLD never gets hot, not even warm in any way at all. Yet I have to keep it freezing cold otherwise it crashes. It doesn’t make any sense to me.
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
Have you tried it in more than one Amiga?alenppc wrote: 11 Jan 2020 21:58 The funny thing is the CPLD never gets hot, not even warm in any way at all. Yet I have to keep it freezing cold otherwise it crashes. It doesn’t make any sense to me.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: Limited TF536 Run - Sort of Sales (All gone)
I did for the first one, not the second one. The first one is the one that was working fine on your machine.
Maybe I’ll try it up later today again. Its been sitting for months unused.
Maybe I’ll try it up later today again. Its been sitting for months unused.
Who is online
Users browsing this forum: CCBot and 15 guests