A few tweaks on the bottom case part and hopefully print out that in the next few days.
- IMG_5524.jpeg (46.67 KiB) Viewed 4991 times
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
Check if your IP is banned
viewtopic.php?t=7286
viewtopic.php?t=7286
STFM case remake
Re: STFM case remake
Another pink prototype print, this time of the removable back panel. One way or another @exxos will get his pink case
A few tweaks on the bottom case part and hopefully print out that in the next few days.
A few tweaks on the bottom case part and hopefully print out that in the next few days.
Re: STFM case remake
Edit:
No need for RF hole though
Re: STFM case remake
Yep - That’s the great thing we can now have whatever we want on there as different slot in options
I Just noticed we need to add on the port icons as well.
Re: STFM case remake
Oh yep.. Plus logoIcky wrote: Sun Aug 02, 2020 12:34 am Yep - That’s the great thing we can now have whatever we want on there as different slot in options
I Just noticed we need to add on the port icons as well.
. Though icons should be easier now the back is flat printed -
tony.reynolds
- Posts: 34
- Joined: Mon Apr 06, 2020 3:54 am
Re: STFM case remake
This is superb work, niiiiice job!
;Manually change to secret room.
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
Re: STFM case remake
Transparent would look so cool, is that even possible though?
Re: STFM case remake
@shintek - I did look into clear ABS a while back for a different project and most always ends up opaque or frosted. There was one reporting to be truly clear but it was about £50 a reel so didn't fork out to see if it worked or not.shintek wrote: Sun Aug 02, 2020 3:22 am Transparent would look so cool, is that even possible though?
-
rubber_jonnie
- Site Admin
- Posts: 13041
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: STFM case remake
@Icky Nice job Can't wait to see the full case
Can't wait to see the full caseCollector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: STFM case remake
Started on the text for rear panel and then need to do the icons. Will have to see how it actually comes out on the print.
- Screenshot 2020-08-11 at 09.14.16.png (326.41 KiB) Viewed 5122 times
- Screenshot 2020-08-10 at 20.31.31.png (249.11 KiB) Viewed 5122 times
Re: STFM case remake
Just playing around with some more printed parts. Not the best of keyboards its a defunct one. Just need a few tweaks, very minor adjustments. e.g. 1 mm extra on the function key aperture lengthways and width ways as its a little tight.
- IMG_5651.jpeg (96.33 KiB) Viewed 5014 times
- IMG_5648.jpeg (146.3 KiB) Viewed 5014 times