You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Assembled H4 interests
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: Assembled H4 interests
:dizzy: These guys are really demonstrating how NOT to run a business.. that's ridiculous. :dizzy:
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Assembled H4 interests
Some small news... It seems they started the builds as apparently I've not sent enough bits... But not everything is fitted anyway... They should be getting back to me tomorrow to say what's missing...
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Assembled H4 interests
A small thought... While these are assembled, they won't have any fixes / mods done to them and won't be tested either. @Steve may be able to do that work ? But of course if any boards have faults, then it would likely be time consuming to diagnose..
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Assembled H4 interests
Just got word back and there are some parts missing which haven't been fitted, I swear I sent enough parts, but with so many projects and so many parts ongoing mistakes do happen unfortunately.
Overall the bulk of the parts are fitted, when I get these back hopefully towards the end of next week, I will have to order and fit the missing parts myself. As nobody has any opinions about the fixes and testing, there will be supplied "as is" meaning you will have to work through the fixes list yourself.
Overall the bulk of the parts are fitted, when I get these back hopefully towards the end of next week, I will have to order and fit the missing parts myself. As nobody has any opinions about the fixes and testing, there will be supplied "as is" meaning you will have to work through the fixes list yourself.
You do not have the required permissions to view the files attached to this post.
-
JezC
- Posts: 2772
- Joined: 28 Aug 2017 23:44
Re: Assembled H4 interests
Hurrah - progress at last!
:yay: :yay2: :cheer: :thumbup:
I was expecting to do the fixes myself anyway but I guess I should have said so. :blonde: :stickwhack:
Sorry...
I really must make time to sort out the donor boards now...
:yay: :yay2: :cheer: :thumbup:
I was expecting to do the fixes myself anyway but I guess I should have said so. :blonde: :stickwhack:
Sorry...
I really must make time to sort out the donor boards now...
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Assembled H4 interests
Collection is booked for today, so I should get them tomorrow. Though as said before, there are a few bits missing I need to fit first, I probably won't get chance until next week to do that..
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: Assembled H4 interests
Kind of strange the GAL is soldered in. :o
-
exxos
- Site Admin
- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Assembled H4 interests
good spot.. I didnt even send any GAL's...
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
-
rubber_jonnie
- Site Admin
- Posts: 14731
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Assembled H4 interests
Yeeeeeeah, go solder sucker!!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Who is online
Users browsing this forum: CCBot and 13 guests