What's wrong with it? I have the X-surf 100 version and it works great.
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF360 Rev 1 Arrives
Moderators: terriblefire, Terriblefire Moderator
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: TF360 Rev 1 Arrives
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Its very processor intensive and it can only trigger a very high level interrupt. Cant trigger an INT2. Oh and its only 8 bits wide.alenppc wrote: 11 Oct 2019 14:14What's wrong with it? I have the X-surf 100 version and it works great.
And it seems to be half assed ATA/IDE signal wise.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF360 Rev 1 Arrives
Failure rate reaches 90% on them.. Have heard a lot of complaints from users regarding this hardware, also saw a discussion here:alenppc wrote: 11 Oct 2019 14:14 What's wrong with it? I have the X-surf 100 version and it works great.
http://eab.abime.net/showthread.php?t=94507
Retro computer hardware & repair in Germany
-
juz400
- Posts: 36
- Joined: 11 Sep 2019 20:18
Re: TF360 Rev 1 Arrives
Very nice work,
Looking forward to your next stream and if you`ve had any more thoughts on the possible riser pcb
Looking forward to your next stream and if you`ve had any more thoughts on the possible riser pcb
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF360 Rev 1 Arrives
Using Subway on A500 and A1200 for about three years, never got an issue, it just works like it should..
Would like to buy more Subways, but these are not available anymore..
You do not have the required permissions to view the files attached to this post.
Retro computer hardware & repair in Germany
-
sugar
- Posts: 77
- Joined: 20 Apr 2019 22:28
Re: TF360 Rev 1 Arrives
I can volunteer to test one with some clockport kit :lol:
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
The NOTPORT will be the last thing i look at on this board.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Missing some parts but...
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Yeah. Last version supported 128/256 but I never tried the chips
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 2 guests