You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Subzero79's build
Moderators: terriblefire, Terriblefire Moderator
-
PhilC
- Moderator
- Posts: 7414
- Joined: 23 Mar 2018 20:22
Re: Subzero79's build
Sounds like bad / loose connections on the relocator.
If it ain't broke, test it to Destruction.
-
Subzero79
- Posts: 73
- Joined: 25 Sep 2019 20:57
Re: Subzero79's build
All pins soldered
If i use ide boots with 0 mb fast
If no ide atached and boot from floppy 2 mb memory
If i use ide boots with 0 mb fast
If no ide atached and boot from floppy 2 mb memory
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Subzero79's build
Check ide cable length, should be approx 10cm
this usually happens when ide cable is too long
this usually happens when ide cable is too long
Retro computer hardware & repair in Germany
-
Subzero79
- Posts: 73
- Joined: 25 Sep 2019 20:57
Re: Subzero79's build
Ok cut ide cable to 2cm and is beter
Sometimes lose fast ram. Un 5;to 6 times is ok
Sometimes lose fast ram. Un 5;to 6 times is ok
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Subzero79's build
at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables
it's because IDE isn't buffered, try to avoid long ide cables
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Subzero79's build
Or buy an IDE buffer. Possibly i should make a cheap buffer design available so people can use one if they need.8 Bit Dreams wrote: 17 Feb 2020 19:14 at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 10 guests