PaulJ's H4 Mongrel Build x 2

[PaulJ]

Good News.. Received a board this evening and other ordered parts..:) :) :)
Bad News.... Ordered 2 received 1 ...:( :( :(

IMG_2315.jpg

OneBoard.png

[PaulJ]

Love the Unique retro-case you are using.

What else but an Atari 1040 box cut down. :mrgreen: :mrgreen: :mrgreen:

[PaulJ]

Have almost all the discrete components and surface mount stuff installed. Most likely will not put on the 16 mhz osc since it covers 99.5% of the pads. Missing the 75 ohm sm resisters. They were backordered. Shesh... usually check that everything is shipping. So I had to place another order to cover missing items. They should be here Wednesday so I expect to power up on Thursday baring any more missing components.

4444.jpg

[Icky]

Nice progress @PaulJ.

[PaulJ]

Getting there.. mostly sockets and IC's left. Should finish Sunday except for memory sim socket, 33 ohm resisters, and 75 ohm smt resisters. :D :D :coffee:

IMG_2324.jpg

IMG_2323.jpg

IMG_2321.jpg

IMG_2320.jpg

[Icky]

Coming along nicely @PaulJ.

[PaulJ]

Pretty much finished up with the parts I have. Ran into one part I'm short, SN74LS07.. :mad: Is there something I can use until my 07 shows up wednesday? The 75 ohm SMT resisters show up Tuesday but I can run without them with the diagram. So were getting there.

amd.jpg

[exxos]

You have to use the correct parts :)

[PaulJ]

You have to use the correct parts :)

Realize that but sometimes there are parts are close enough where you can substitute. Shesh I even ask Phil if there's something I could plug in backwards that would work. :twisted: Guess I'm just going to wait. :(

[PaulJ]

Well everything showed up today so I have finish building the board waiting for that pesky sn74ls07 which should show tomorrow. :cry: I do need to set all the jumpers since a lot of the pins were not installed when I set them initially. So planning to shoot the juice to it tomorrow and check for any of @PhilC magic smoke. :excited:

IMG_2328.jpg

IMG_2329.jpg

IMG_2330.jpg