:lolbig: :merryxmas:PaulJ wrote: 12 Dec 2019 14:44 Never hurts to have some extra pull-ups available in various locations on the H4. :D
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Looks like I'll be getting a Mega ST4 soon
-
exxos
- Site Admin

- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Looks like I'll be getting a Mega ST4 soon
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
-
rubber_jonnie
- Site Admin

- Posts: 14729
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Looks like I'll be getting a Mega ST4 soon
Good idea!PaulJ wrote: 12 Dec 2019 14:44 Don't cut it off RJ, bend it up and if you ever need another pullup you can wire wrap to the pin that's bent up along the body. Never hurts to have some extra pull-ups available in various locations on the H4. :D
:dizzy:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
rubber_jonnie
- Site Admin

- Posts: 14729
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Looks like I'll be getting a Mega ST4 soon
Oooh, I like a challenge!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
rubber_jonnie
- Site Admin

- Posts: 14729
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Looks like I'll be getting a Mega ST4 soon
I decided that today was the day for pulling out the resistor packs from the Mega 4 in preparation for the arrival of the 9 pin 2.2ks. Interestingly I found this resistor pack was cracked in the middle.
I know I didn't break it during removal but it could be a clue as to why things have been erratic if only three of the resistors were actually doing anything.
I'll post again once I have the ones installed.
The other thing is that some of the vias are already in a terrible state even before I get started. Nothing that a bodge wire can't fix though.
I know I didn't break it during removal but it could be a clue as to why things have been erratic if only three of the resistors were actually doing anything.
I'll post again once I have the ones installed.
The other thing is that some of the vias are already in a terrible state even before I get started. Nothing that a bodge wire can't fix though.
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
PhilC
- Moderator

- Posts: 7414
- Joined: 23 Mar 2018 20:22
Re: Looks like I'll be getting a Mega ST4 soon
Funny what you can find when fixing old Megas, well done finding that SIL, woulda been a pain to find otherwise.
If it ain't broke, test it to Destruction.
-
exxos
- Site Admin

- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Looks like I'll be getting a Mega ST4 soon
Wow a cracked sil wouldn't help things that's for sure.
-
rubber_jonnie
- Site Admin

- Posts: 14729
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Looks like I'll be getting a Mega ST4 soon
It potentially answers the questions of why it would sometimes just die when I next powered it off and on. I'd manhandle the board, then it would work again. Possibly the cracked SIL making and breaking a connection. Finally when I manhandled the board a lot during the CPU removal, I reckon it finally finished the SIL off.
We'll see what happens when I fit the new ones.
@exxos it had a mix of 4.7k and 10k, I take it 2.2k all round is fine?
We'll see what happens when I fit the new ones.
@exxos it had a mix of 4.7k and 10k, I take it 2.2k all round is fine?
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
exxos
- Site Admin

- Posts: 28213
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Looks like I'll be getting a Mega ST4 soon
@rubber_jonnie yeah I use 2.2k all around.
-
rubber_jonnie
- Site Admin

- Posts: 14729
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Looks like I'll be getting a Mega ST4 soon
@exxos Cool thanks.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Who is online
Users browsing this forum: Baidu [Spider], CCBot, petal [bot], rubber_jonnie, Zogging Hell and 60 guests