You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
The TF536 on a CDTV (Project Abandoned)
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF536 on a CDTV
I have understood more about the workings of the cdtv.driver.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF536 on a CDTV
Ok seeing the Warp CDTV has made me give up on the CDTV. Its back in the cupboard and I wont be doing any more work on it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: The TF536 on a CDTV
Impressive to see that they've managed to create something so offensive that it prompted you to abandon the CDTV in disgust! :)
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF536 on a CDTV
I want to put my effort where its needed.go0se wrote: 03 Sep 2020 09:49 Impressive to see that they've managed to create something so offensive that it prompted you to abandon the CDTV in disgust! :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
utri007
- Posts: 181
- Joined: 13 Nov 2018 22:20
Re: The TF536 on a CDTV
OK, no CDTV accelerator for me. :( Warp CDTV is just piece of paper currently. If it would ever materialize cost of accelerator would be 499€ without a CPU. It is not just a a accelerator, it is multipurpose board quite much stuff on it. I would like to get just an accelerator.
So Stephen, could you reconsider CDTV support?
So Stephen, could you reconsider CDTV support?
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF536 on a CDTV
As i've said about 100 times now. The issue with CDTV support is entirely software. I dont feel like fixing the driver just so the Warp guys can sell their thing. Let them do it. I've already put months of effort into this.
EDIT: in other words i will put 2000 hours of effort into this and they will make a lot of money from it. No thanks. I'll let them fix it.
EDIT: in other words i will put 2000 hours of effort into this and they will make a lot of money from it. No thanks. I'll let them fix it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
utri007
- Posts: 181
- Joined: 13 Nov 2018 22:20
Re: The TF536 on a CDTV
with all respect, I think that it is not even remotely possible, that anyone could do money with CDTV. CS-Labs has said many times that Amiga is just a hobby for them and they do what they do just because they can.Even if they solve CD-drive system, they don't need to make it public.
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF536 on a CDTV
Well yes they do because the driver will have to be fixed exactly the same for the TF and the Warp. They have to release the binary at least insofar as the system can read the cdtv.device. I have sold one of my CDTVs and the other will stay in my cupboard. I may sell it too. I have too many projects and i need to simplify. If others are working on the same thing i will drop my version.utri007 wrote: 03 Sep 2020 13:44 with all respect, I think that it is not even remotely possible, that anyone could do money with CDTV. CS-Labs has said many times that Amiga is just a hobby for them and they do what they do just because they can.Even if they solve CD-drive system, they don't need to make it public.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 0 guests