You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

TF536 on the ST

Other boosters or variants.
User avatar
Umberto1st
Posts: 105
Joined: 27 Sep 2017 18:27

Re: TF536 on the ST

Post by Umberto1st »

terriblefire wrote: 04 Aug 2020 18:27
Umberto1st wrote: 04 Aug 2020 18:17 Both the 534 and 536 have required a byte swapped cable to be seen by TOS 2.06 and Emutos and TOS2.06 has never auto booted even with INT connected
This is wrong. EmuTOS does not need a byte swap. It autodetects. I am using it right now without a swap cable.
Your right, Emutos auto detects. Sorry for being vague. But TOS 2.06 does not
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5681
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 on the ST

Post by terriblefire »

Umberto1st wrote: 04 Aug 2020 18:32
terriblefire wrote: 04 Aug 2020 18:27

This is wrong. EmuTOS does not need a byte swap. It autodetects. I am using it right now without a swap cable.
Your right, Emutos auto detects. Sorry for being vague. But TOS 2.06 does not
OK.. scratch my last... MWHAHAHAHA... working IDE..
tf536r2_main_top_IDE_WORKS.zip
mwhahahahahaha.PNG
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5681
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 on the ST

Post by terriblefire »

Ah damn... its working for read path only.. not write.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
EzdineG
Posts: 68
Joined: 12 Nov 2018 17:19

Re: TF536 on the ST

Post by EzdineG »

Twisted or non twisted cable?
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5681
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 on the ST

Post by terriblefire »

EzdineG wrote: 04 Aug 2020 18:41 Twisted or non twisted cable?
Not twisted. DO NOT TRY AND WRITE to your disk yet.. it will corrupt it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7312
Joined: 23 Mar 2018 20:22

Re: TF536 on the ST

Post by PhilC »

Back home and armed and ready to test :lol:

I've not tested the latest firmware that corrupts on writing to HD but am testing with the previous version.
If it ain't broke, test it to Destruction.
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5681
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 on the ST

Post by terriblefire »

PhilC wrote: 05 Aug 2020 14:44 Back home and armed and ready to test :lol:

I've not tested the latest firmware that corrupts on writing to HD but am testing with the previous version.
Try this one... No cable swap needed. But no idea how IDE performs... but its 100% plug and play.

I've been able to create files and save my desktop.
tf536r2_main_top_ATARI_NOSWAP.zip
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7312
Joined: 23 Mar 2018 20:22

Re: TF536 on the ST

Post by PhilC »

@terriblefire That sounds cool, will give it a go and report back.

Edit:

Booting with that firmware for me gives 11 bombs on both my H4 and Mega ST. Bootung with EmuTOS shows no hard drives.
If it ain't broke, test it to Destruction.
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5681
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 on the ST

Post by terriblefire »

PhilC wrote: 05 Aug 2020 16:05 @terriblefire That sounds cool, will give it a go and report back.

Edit:

Booting with that firmware for me gives 11 bombs on both my H4 and Mega ST. Bootung with EmuTOS shows no hard drives.
Booting reliably on my H4 here. :/

Will not work with a twisted IDe cable.

EDIT: this is my up to date one...
tf536r2_main_top_ATARI_IDENOSWAP.zip
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7312
Joined: 23 Mar 2018 20:22

Re: TF536 on the ST

Post by PhilC »

I'm using a CF card with straight cable. Refresh with a previous good firmware i use for testing and its all good again but no HD

Edit: ok will try that one after dinner
If it ain't broke, test it to Destruction.
Top

Return to “EVERYTHING ELSE”

Who is online

Users browsing this forum: CCBot and 39 guests