Ok, i'll let You know, Alenalenppc wrote: 21 Apr 2019 15:49 8 bit dreams, please let us know if any of those 060 are not fakes and if so where you got them from. Hopefully I'll get to build my 060 prototype soon too :)
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF360 Discussions
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF360 Discussions
Retro computer hardware & repair in Germany
-
ed_dream
- Posts: 12
- Joined: 17 Jan 2019 12:04
Re: TF360 Discussions
I have 15 cpu MC68LC060RC66. Soldered.
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
These are the original Motorola processors. And they are cheap.))))
And I am ready to sell them. But for this I need to check them. I will wait for the first available release of the 360 motherboard. And after checking everyone, I will sell them if you need them and you are not afraid of what they are soldering.
These are the original Motorola processors. And they are cheap.))))
You do not have the required permissions to view the files attached to this post.
-
supaduper
- Site sponsor
- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: TF360 Discussions
TF360.....third one to breathe Life aswell as Steve`s and Chuckys :)
You do not have the required permissions to view the files attached to this post.
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Discussions
Is the bus CPLD getting warm?supaduper wrote: 07 May 2019 13:30 TF360.....third one to breathe Life aswell as Steve`s and Chuckys :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor
- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: TF360 Discussions
Yes Steve, its all getting warm lol, will have to heatsink the Volt reg like you
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Discussions
So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor
- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: TF360 Discussions
Mate you are well ahead, end of ! ;)
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: TF360 Discussions
The 68060 libraries working now?
-
supaduper
- Site sponsor
- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: TF360 Discussions
Not quite I am using the lizzard libs :) on an OS 3.9 and it boots to WB with some functionality but as Steve says with bugs
-
chucky
- Posts: 100
- Joined: 13 Jan 2019 20:42
Re: TF360 Discussions
Hey.. do not jinx it :)terriblefire wrote: 07 May 2019 14:21 So by my rekoning i'm 3 months ahead of where I expected to be with this board. I was expecting alot more issues with the initial bringup.
Who is online
Users browsing this forum: CCBot, HigashiJun and 2 guests