Busy designing the baseboard for it... Is twice the size of my print bed though :(, so where is @Icky and his giant panda...
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
exxos blog - random goings on
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
You do not have the required permissions to view the files attached to this post.
-
Icky
- Site Admin
- Posts: 4322
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: exxos blog - random goings on
@exxos - send over the stl the Giant Panda is ready to go. The upgrades last weekend were good, runs quieter and seems to have more precision :)
-
PhilC
- Moderator
- Posts: 7383
- Joined: 23 Mar 2018 20:22
Re: exxos blog - random goings on
How about making it out of acrylic sheet? Looks easy enough from that angle.
If it ain't broke, test it to Destruction.
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Yeah, but..PhilC wrote: 17 Jun 2020 10:48 How about making it out of acrylic sheet? Looks easy enough from that angle.
1) no time to look for sheets
2) would have to get it cut to size as I dont have time to do it
3) Theres no way I would be able to drill all the holes accurately enough
4) did I mention I don't have time ? :lol:
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Had enough of just not being able to move or find anything, so everything else will have to wait until I have tidied up.
Hour 0 :
Hour 3:
Hour 0 :
Hour 3:
You do not have the required permissions to view the files attached to this post.
-
IngoQ
- Site Admin
- Posts: 1073
- Joined: 22 Aug 2017 08:38
- Location: Germany
Re: exxos blog - random goings on
... and that was the last we ever heard of him :o
:mrgreen:
:mrgreen:
Ingo :geek:
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
You might be right! The stuff is now all over the landing, stairs and hallway.. and workshop still doesn't look any different :shock:
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Sometime later :dizzy:
I'm offloading some stuff up into the loft, but way to hot to go up there currently.
I've got around 30 boards im going to rip a few bits n bobs off then chuck them as I just don't have room for all these boards :(
I'm offloading some stuff up into the loft, but way to hot to go up there currently.
I've got around 30 boards im going to rip a few bits n bobs off then chuck them as I just don't have room for all these boards :(
You do not have the required permissions to view the files attached to this post.
-
JezC
- Posts: 2769
- Joined: 28 Aug 2017 23:44
Re: exxos blog - random goings on
Is it worth asking if anybody wants any of those boards before you dump them?
Obviously they will need to cover p&p etc. but some forum members (like me) may have a few poorly STs to try & resurrect & this may be an opportunity to get at least some of the bits without having to be heavily gouged on the bay of fleas...
Fully appreciate that you're taking most of the more expensive items for you store... ;)
Obviously they will need to cover p&p etc. but some forum members (like me) may have a few poorly STs to try & resurrect & this may be an opportunity to get at least some of the bits without having to be heavily gouged on the bay of fleas...
Fully appreciate that you're taking most of the more expensive items for you store... ;)
-
exxos
- Site Admin
- Posts: 28160
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
I think I have asked before on here if anyone wants whats left of these boards, but no takers. Mostly the main chips and sockets will be gone.. Mostly DMA,SHIFTER, MMU,GLUE, DB19, CARTRIDGE CONNECTOR, PLCC68 sockets, 1772 etc . If someone wants to take the lot after the culling then saves me a trip to the tip ;)
Who is online
Users browsing this forum: Ahrefs [bot], CCBot, Google [Bot], Majestic-12 [Bot] and 2 guests