Are anymore bare PCB's avilable? or provide a link for the Gerber's?
TIA
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time it is unfortunately not possible to white list users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time it is unfortunately not possible to white list users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Sales Thread (TF534 Bare Boards)
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5663
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Sales Thread (TF534 Bare Boards)
You’ll need to generate the gerbers using the board house cam file from the eagle source.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
steve.clifford
- Posts: 2
- Joined: Mon Jan 28, 2019 3:30 pm
Re: Sales Thread (TF534 Bare Boards)
Thanks!!terriblefire wrote: Mon Jul 22, 2019 9:58 am You’ll need to generate the gerbers using the board house cam file from the eagle source.