You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time it is unfortunately not possible to white list users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Sweet. As I faced similar problem and since I lack your 3D printing / PCB designing skills, I had to do with a home made solution:
ribbon.jpg (171.93 KiB) Viewed 7501 times
card.jpg (199.63 KiB) Viewed 7501 times
outside.jpg (127.5 KiB) Viewed 7501 times
The biggest hell was to flip *all* the ribbon connectors, so I could place it like that (otherwise they would go the "wrong" direction - on the top of the PCB). This way I could keep even the shielding and everything.
Nice solution @mikro. I did go down that route but wasn't satisfied. Plus the external graphics 3D printed GFX card housing I did still kept nagging at my OCD. I really wanted a neat solution.
Am hoping I can refine this so it becomes a sort of frame that can be placed into the TT and provide all the right ports out neatly at the back.
I assume since it also has VME, this might work for the MegaSTE as well?
Is anyone aware of any modern solutions for VME as I'd be interested in some sort of adapter to drop a suitable VGA card into mine?
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Stumbled at the first hurdle - it doesn't like BigSur the printer is not recognised. Works fine in Windoze but seems that BigSur on the Mac yet again is the mother of all upgrades.
Hardly anything works with Big Sur. They changed so much under the hood that devices drivers are completely incompatible as are anything which interacts with the kernel directly, such as Anti-Virus programs. Sophos expect to get their anti-virus working on it by... The Autumn!
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
stephen_usher wrote: Tue Feb 16, 2021 9:00 pm
Hardly anything works with Big Sur. They changed so much under the hood that devices drivers are completely incompatible as are anything which interacts with the kernel directly, such as Anti-Virus programs. Sophos expect to get their anti-virus working on it by... The Autumn!
Agree they have messed up a bit with BigSur.
On the other hand I have fixed the issue. Had some stale FTDI drivers which aren't playing nicely with the BiGSur apple version. Remove those old ones that have been working pre-BigSur and it is now recognised.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
As I faced similar problem and since I lack your 3D printing / PCB designing skills, I had to do with a home made solution:
I actually think I have that book somewhere here..
