This is how I have mine wired up... I assume this is right anyway ?
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
ST-IDE-ROM Dev Board v1 - BETA Testers
-
exxos
- Site Admin
- Posts: 28217
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
You do not have the required permissions to view the files attached to this post.
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Looks good to me Exxos.. :) :) :)
-
exxos
- Site Admin
- Posts: 28217
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
The card is faulty Phil... It doesn't seem to even sustain any kind of bulk reads or writes.
You do not have the required permissions to view the files attached to this post.
-
PhilC
- Moderator
- Posts: 7420
- Joined: 23 Mar 2018 20:22
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Ok cool, glad it wasn't just me then. Odd thing is that it worked under windows. Bin it or whatever you want?
Hope you liked the label :lol:
If it ain't broke, test it to Destruction.
-
exxos
- Site Admin
- Posts: 28217
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
I'm using windows, it will format and even copy small files, but and long write tests it dies.. its just a bad card..PhilC wrote: 16 Apr 2019 18:21 Ok cool, glad it wasn't just me then. Odd thing is that it worked under windows. Bin it or whatever you want?
https://www.exxosforum.co.uk/forum/viewt ... 230#p20769
-
PhilC
- Moderator
- Posts: 7420
- Joined: 23 Mar 2018 20:22
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Ah, didnt see that. Not an Icky label but inspired by one nonetheless
If it ain't broke, test it to Destruction.
-
Icky
- Site Admin
- Posts: 4350
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
I've got a label for that :DPhilC wrote: 16 Apr 2019 18:35 Ah, didnt see that. Not an Icky label but inspired by one nonetheless
-
PhilC
- Moderator
- Posts: 7420
- Joined: 23 Mar 2018 20:22
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Me too!
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
-
rubber_jonnie
- Site Admin
- Posts: 14787
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
OK, I seem to have a working interface, just using AHDI at the moment.
I'm currently formatting a 128MB CF card, then I'll see if I can install the driver and boot from it.
I've also tried a 4GB card and it's also recognised and I can see a file on there from previous usage with my STE, but have yet to try repartition etc. Hopefully will do some more tomorrow.
Also have vid of the formatting but will need to get back to my laptop to upload.
I'm currently formatting a 128MB CF card, then I'll see if I can install the driver and boot from it.
I've also tried a 4GB card and it's also recognised and I can see a file on there from previous usage with my STE, but have yet to try repartition etc. Hopefully will do some more tomorrow.
Also have vid of the formatting but will need to get back to my laptop to upload.
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
Icky
- Site Admin
- Posts: 4350
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
:bravo:rubber_jonnie wrote: 16 Apr 2019 23:49 OK, I seem to have a working interface, just using AHDI at the moment.
IMG_20190416_232903.jpg
I'm currently formatting a 128MB CF card, then I'll see if I can install the driver and boot from it.
I've also tried a 4GB card and it's also recognised and I can see a file on there from previous usage with my STE, but have yet to try repartition etc. Hopefully will do some more tomorrow.
Also have vid of the formatting but will need to get back to my laptop to upload.
Who is online
Users browsing this forum: CCBot and 5 guests