You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
PhilCs blog / the latest things hes broken(fixed)
-
stephen_usher
- Site sponsor
- Posts: 7231
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: PhilCs blog / the latest things hes broken(fixed)
:lol:
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
Plugged in the first couple of fixed TF536 boards and with EmuTOS it boots straight up to desktop and the 4gb CF card I formatted with a 4GB partition is visible and accessible straight away. So well happy with that.
Had to do the obligatory Grmbench test. I think something went wrong at first or this 68030 is running at like 500mhz.
But then proper scores :lol:
Had to do the obligatory Grmbench test. I think something went wrong at first or this 68030 is running at like 500mhz.
But then proper scores :lol:
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
Havent put a lot in here lately, so thought I'd update my blog with a couple of pics that show that the TF536 and the Phoenix H4 are made to go together.
The TF536 sits on top of one of @exxos 's decoder boards, which leaves the bottom three expansions free for further expansion like the flashy clock.
The TF536 sits on top of one of @exxos 's decoder boards, which leaves the bottom three expansions free for further expansion like the flashy clock.
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
So Finally got my first H4 finished. (well nearly) Its in its case anyway.
The case needs some TLC and its likely to be sprayed a nice shade of black at some point.
Its an H4 SMT VGA edition 4mb Ram, EmuTOS and Tos2.06 with a TF536 added for good measure.
Things to finish, adding a photo socket for audio out.
Just wondered though, am I the only one who names their H4s?
The case needs some TLC and its likely to be sprayed a nice shade of black at some point.
Its an H4 SMT VGA edition 4mb Ram, EmuTOS and Tos2.06 with a TF536 added for good measure.
Things to finish, adding a photo socket for audio out.
Just wondered though, am I the only one who names their H4s?
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
-
DoG
- Posts: 1284
- Joined: 07 Apr 2018 12:26
Re: PhilCs blog / the latest things hes broken(fixed)
Yeah? Not just for pics then? Hehe ;)
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
@DoG joys of auto correct on phones :roll:
If it ain't broke, test it to Destruction.
-
Icky
- Site Admin
- Posts: 4286
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: PhilCs blog / the latest things hes broken(fixed)
@PhilC, you seem to be missing the :logo: Phoenix logo on the badge
-
JezC
- Posts: 2754
- Joined: 28 Aug 2017 23:44
Re: PhilCs blog / the latest things hes broken(fixed)
:lol:
Time for version #2 of the label...? Or is it just the broken version so that he can fix it? ;)
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
Very true guys, I will fix it later on
If it ain't broke, test it to Destruction.
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: PhilCs blog / the latest things hes broken(fixed)
had a bit of a play around tonight with a TF536 and a C103414 motherboard to see how easy it would be to get the board up and running.
Once the cpu was removed, I plugged in one of the R1 1C ide boards to use as the decoder and rom board, plugged the TF536 into that and I am happy to announce that it all booted up straight away.
I dont know if I was more surprised that the TF536 worked right away or that the motherboard was still any good. :lol:
Once the cpu was removed, I plugged in one of the R1 1C ide boards to use as the decoder and rom board, plugged the TF536 into that and I am happy to announce that it all booted up straight away.
I dont know if I was more surprised that the TF536 worked right away or that the motherboard was still any good. :lol:
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
Who is online
Users browsing this forum: CCBot and 48 guests