Or as you have more than one board for your project, build one and look at the other as a reference ;)PhilC wrote: 13 Nov 2019 21:24 Actually, it's me being silly, I should just take a photo when the boards arrive.
#blondemoment
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
REV H1 information and interest
-
Icky
- Site Admin

- Posts: 4345
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: REV H1 information and interest
-
PhilC
- Moderator

- Posts: 7408
- Joined: 23 Mar 2018 20:22
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
:lolbig:
Will try and take some better shots tomorrow anyway.
-
IngoQ
- Site Admin

- Posts: 1073
- Joined: 22 Aug 2017 08:38
- Location: Germany
Re: REV H1 information and interest
Very nice indeed ... and a little intimidating :)
Ingo :geek:
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
I am starting to pack up the boards today (Will take a while)
Please can people keep a eye on their emails (mostly UK people to start with).
Please can people keep a eye on their emails (mostly UK people to start with).
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
So there's a slight problem with posting this stuff with cases as royalmail don't seem to do the package size overseas (I checked on this before and sure they did!) But this means that all orders will have to go parcelforce which is knocking £40 basically :( . This is cheapest post without tracking. With tracking it has to go UPS and about £5 more. I looked on parcel2go, but there really isn't anything much cheaper anyway.
EDIT:
This is also a problem to ship boards, as the boxes I am using (even after cutting them down all feking day) still are to big for small parcel. But the board itself is small parcel, so I am going to have to re-think all this as otherwise everyone overseas will be knocking £40 postage :roll:
EDIT:
This is also a problem to ship boards, as the boxes I am using (even after cutting them down all feking day) still are to big for small parcel. But the board itself is small parcel, so I am going to have to re-think all this as otherwise everyone overseas will be knocking £40 postage :roll:
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
I have managed to re-pack the boards up. Basically it ended up the boards sandwiched between 2 card sheets (with bubble wrap). I had to get the length down to 48cm as the post limit is 50cm... (the boxes I had made ended up at 51cm somehow :( ), so its taken 2 days to chop stuff up and package some orders that way.. as the boards are 45cm wide this isn't easy to pad out much.. It was either that or postage prices started to jump from like £25 to £60!
Anyway, those who had payment emails over the past 2 days (And paid) your order will (hopefully, if I can get to the post office before 10am!) be posted out in the morning.
All remaining orders I will start packing up early next week. Postage emails will be going out all day monday as I pack and weigh items. Paid ones will hopefully get shipped Tuesday.
Anyway, those who had payment emails over the past 2 days (And paid) your order will (hopefully, if I can get to the post office before 10am!) be posted out in the morning.
All remaining orders I will start packing up early next week. Postage emails will be going out all day monday as I pack and weigh items. Paid ones will hopefully get shipped Tuesday.
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
A lot of boards got shipped out this morning. Its possible some UK people may even get them early next week. Tracking has been sent out for all posted packages. I am going to try and get the remaining orders packed and shipped early next week.
-
exxos
- Site Admin

- Posts: 28209
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: REV H1 information and interest
All remaining orders have been packed today. All payment emails have been sent out. I am still waiting on a few people... There are some people who did double or triple orders where I have not sent payment emails because of postage paid in my store items covers the cost anyway.
Packages will be sent out tomorrow :)
Packages will be sent out tomorrow :)
-
rubber_jonnie
- Site Admin

- Posts: 14678
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: REV H1 information and interest
@exxos
My board, case and other items arrived today, thanks!
Case is very nice thanks, just what I needed.
Mongrel board is pure art 😁
Oh and mentions seem to be working on my phone now too😊
My board, case and other items arrived today, thanks!
Case is very nice thanks, just what I needed.
Mongrel board is pure art 😁
Oh and mentions seem to be working on my phone now too😊
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Who is online
Users browsing this forum: CCBot and 19 guests