You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok I think that’s everyone. If you haven’t had a reply from me let me total up how many I have left before I take any more orders
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Latest TF534 is here
I'd like to take 10x, just need to get TF330 first and build some to refill my PayPal... :oops:
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Your TF330s were posted on Friday :)8 Bit Dreams wrote: 05 Mar 2019 13:20 I'd like to take 10x, just need to get TF330 first and build some to refill my PayPal... :oops:
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: Latest TF534 is here
I bet I get them before he does. ;)terriblefire wrote: 05 Mar 2019 13:45Your TF330s were posted on Friday :)8 Bit Dreams wrote: 05 Mar 2019 13:20 I'd like to take 10x, just need to get TF330 first and build some to refill my PayPal... :oops:
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
They were posted at the same time.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
I have just finished a marathon packaging sprint. I've posted all the boards.
There are 23 TF534 boards left.
There are 23 TF534 boards left.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
mike.warren
- Posts: 2
- Joined: 05 Mar 2019 21:05
Re: Latest TF534 is here
Hi, could I take a couple of boards please? Being a noob I might not be able to PM however...
-
techniplex
- Posts: 16
- Joined: 15 Nov 2018 15:23
Re: Latest TF534 is here
I would like 2 of them. Please let me know the best way to pay and it would be shipping to the US.
Thanks
Thanks
-
EzdineG
- Posts: 68
- Joined: 12 Nov 2018 17:19
Re: Latest TF534 is here
I reckon I’ll hop in and build a couple. Sent pm for two.terriblefire wrote: 05 Mar 2019 20:03 I have just finished a marathon packaging sprint. I've posted all the boards.
There are 23 TF534 boards left.
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Latest TF534 is here
Everyone replied to. Message me again if I missed you.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 0 guests