You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
Re: Latest TF534 is here
It might be present on the 2b also, maybe I just missed it. Will confirm later.
-
terriblefire
- Admin sponsor
- Posts: 5670
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok i can confirm that i have no ESM issues on the TF534r2c @ 50Mhz on any machine A2000/A500 or even the silly CDTV.
Can someone eyeball this BOM for me.. .
https://github.com/terriblefire/tf534/b ... /README.md
Can someone eyeball this BOM for me.. .
https://github.com/terriblefire/tf534/b ... /README.md
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Latest TF534 is here
I think we found out with the 530 that the best R3 value was 47k?
-
terriblefire
- Admin sponsor
- Posts: 5670
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok that shouldnt make much difference. Its the FPU detect value. I usually use 1K. The manual says... it should be larger than 10K though... so hey ho i'll make it 47K.
S
S
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5670
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
Ok I have 49 of the TF534s left. I prefer to sell them direct rather than via ebay. Contact me if you want some.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Latest TF534 is here
Hi TF, I'd probably take a couple
If it ain't broke, test it to Destruction.
Re: Latest TF534 is here
Hi TF ,
Interested in two TF534 PCBs.
Interested in two TF534 PCBs.
Re: Latest TF534 is here
Interested in 4 TF534 and a couple of TF330 Rev3 PCBs if there are any left? I can't currently PM here, perhaps some of you kind mods could make that happen?
Cheers.
Cheers.
Re: Latest TF534 is here
Somehow I can’t seem to PM you either, but I’d love to buy 1 PCB 
Re: Latest TF534 is here
TF, I'll take two.terriblefire wrote: Thu Feb 28, 2019 4:46 pm Ok I have 49 of the TF534s left. I prefer to sell them direct rather than via ebay. Contact me if you want some.