Latest TF534 is here

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

Maximilian
Posts: 291
Joined: Thu Feb 28, 2019 5:02 pm

Re: Latest TF534 is here

Post by Maximilian »

theq wrote: Sat Mar 09, 2019 7:03 am I'm currently sourcing the components from the BOM list and was hoping for some pointers to what to use for U1 (SPI FLASH).
I asked about that:
terriblefire wrote: Fri Mar 01, 2019 8:41 am
Maximilian wrote: Fri Mar 01, 2019 12:36 am Aren't you worried that the generic SPI notation will lead to problems with compatibility?:
You assumed here I’d noticed. The SPI rom is not yet operational. It’s on a long todo list.
It would probably be best to leave that off until we know a type and model, it's not operational at this time so it will not be a problem.
CrazyDave
Posts: 3
Joined: Fri Feb 22, 2019 4:22 pm

Re: Latest TF534 is here

Post by CrazyDave »

Been lurking in here for a while and would
like buy 2 off TF530 and 2 off TF534 if they’re still available? Not sure if I can PM yet as this is my first post!

Love this project and all the other variants. Huge thanks to Steve.. I’ve learnt loads building up my first TF530 Rev 2... nothing like messing with hardware to get the grey matter working 😎
User avatar
kludge
Posts: 399
Joined: Thu Nov 08, 2018 2:05 pm
Location: Sweden

Re: Latest TF534 is here

Post by kludge »

Will the TF534 work with the same 1k resistor networks as the TF530 or do they have to be 10k? Anyone tested with 1k?
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
terriblefire
Moderator Team
Moderator Team
Posts: 5449
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

kludge wrote: Sun Mar 10, 2019 8:29 am Will the TF534 work with the same 1k resistor networks as the TF530 or do they have to be 10k? Anyone tested with 1k?
I use 2K2 resistor networks. I'll make sure the BOM says that.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 908
Joined: Thu Nov 08, 2018 12:59 pm

Re: Latest TF534 is here

Post by alenppc »

kludge wrote: Sun Mar 10, 2019 8:29 am Will the TF534 work with the same 1k resistor networks as the TF530 or do they have to be 10k? Anyone tested with 1k?
If you read a few posts above, I confirmed it works perfectly fine with 1k.
User avatar
kludge
Posts: 399
Joined: Thu Nov 08, 2018 2:05 pm
Location: Sweden

Re: Latest TF534 is here

Post by kludge »

alenppc wrote: Sun Mar 10, 2019 2:09 pm If you read a few posts above, I confirmed it works perfectly fine with 1k.
Sorry, I found it now. Thanks!
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
terriblefire
Moderator Team
Moderator Team
Posts: 5449
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

After shipping to everyone whos' paid i've 8 TF534s left. PM is the best way to get my attention.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Milesunder
Posts: 15
Joined: Sat Mar 09, 2019 10:25 am

Re: Latest TF534 is here

Post by Milesunder »

@Stephen,

Expressing interest in two. PM sent.

Thanks
User avatar
roy-forest-fc.goodall
Posts: 31
Joined: Fri Mar 08, 2019 12:06 am

Re: Latest TF534 is here

Post by roy-forest-fc.goodall »

Sent PM.
Just after 1 board
terriblefire
Moderator Team
Moderator Team
Posts: 5449
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Latest TF534 is here

Post by terriblefire »

I've replied to 4 people with payment details. Others have since asked to purchase. I'm giving those whom i've replied to 24 hours then i'll go down the list of those waiting. I'll order another 50 shortly.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF534 (OBSOLETE)”