Stumbled on Spidi's CDTV card:
http://eab.abime.net/showthread.php?t=95073
Seems he was able to solve DMAC problem, both, ide and CDROM are working! Awesome news, that gives me hope to see TF534 tunning on CDTV one day...
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
My CDTV Nightmare
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: My CDTV Nightmare
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: My CDTV Nightmare
Its more likely to be a 536.. The 534 is not getting touched again.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
dalek
- Posts: 232
- Joined: 08 Nov 2018 11:03
- Location: NSW Australia
Re: My CDTV Nightmare
Shame his stuff is closed source and you can't build one yourself, and that he doesn't share any info back to the community :(
That board also doesn't have a CPU and is CDTV specific, so there could be some cheats involved that a more general accelerator (proper) couldn't get away with.
I'll see if I can do some testing on the weekend with my TF534+A570 - I think the answer is close!
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: My CDTV Nightmare
The DMAC stuff will all be bus grant related. Similar to the Atari ST
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 1 guest