You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Please make sure you are logged in for at least 2 hours
to make sure your IP is added into the firewall whitelist, thanks
to make sure your IP is added into the firewall whitelist, thanks
Forgottenmyname - Progress - Part 2
Re: Forgottenmyname - Progress - Part 2
Maybe I'll turn it into wall art?
If it ain't broke, test it to Destruction.
Re: Forgottenmyname - Progress - Part 2
Frame it, be worth millions in years to come :p
Hope you have better luck this time!
How's close to power up are you?
Hope you have better luck this time!
How's close to power up are you?
Re: Forgottenmyname - Progress - Part 2
Hey, in my book a broken Atari is preferable to a working windoze machine every day of the week and twice on Sunday..
Re: Forgottenmyname - Progress - Part 2
No arguments from me.PaulJ wrote: Sat Dec 15, 2018 2:37 pmHey, in my book a broken Atari is preferable to a working windoze machine every day of the week and twice on Sunday..
If it ain't broke, test it to Destruction.
Re: Forgottenmyname - Progress - Part 2
Just powered it up. Its not doing much so far. Wont have much time this afternoon for much more though.
If it ain't broke, test it to Destruction.
Re: Forgottenmyname - Progress - Part 2
So had a little bit more time this afternoon.
And I think I have a dodgy STF board. no Vsync on either the MMU or Monitor port, which explains why I'm struggling to get a picture. All metered out and it goes to the first via and promptly disappears into the abyss.
So I get to do two more patch wires than the rest of you
Now that will have to wait till tomorrow. Then back to seeing what else I didn't solder correctly.
And I think I have a dodgy STF board. no Vsync on either the MMU or Monitor port, which explains why I'm struggling to get a picture. All metered out and it goes to the first via and promptly disappears into the abyss.
So I get to do two more patch wires than the rest of you
Now that will have to wait till tomorrow. Then back to seeing what else I didn't solder correctly.
If it ain't broke, test it to Destruction.
Re: Forgottenmyname - Progress - Part 2
OH no, more chaos 
I'm not at home until tomorrow night , so can't post a image of where it goes, but think *somewhere* I did post each layer already..
I'm not at home until tomorrow night , so can't post a image of where it goes, but think *somewhere* I did post each layer already..Re: Forgottenmyname - Progress - Part 2
I'll connect it as the schematic for now, so not a problem. Afaik it's glue 38 to monitor port and then to 51 on mmu.exxos wrote: Sat Dec 15, 2018 6:44 pm OH no, more chaos
It's all a learning curve.
If it ain't broke, test it to Destruction.
Re: Forgottenmyname - Progress - Part 2
I assume you did the vsync fix ? As I think it went via a inverter before..Forgottenmyname wrote: Sat Dec 15, 2018 8:29 pm
I'll connect it as the schematic for now, so not a problem. Afaik it's glue 38 to monitor port and then to 51 on mmu.
It's all a learning curve.
Re: Forgottenmyname - Progress - Part 2
Yes I did the whole list but will recheck it in a bit
If it ain't broke, test it to Destruction.