Do they? Ok, in case of shortage I can help distribute these. There will be a bit of overhead due to shipping+customs but it should be able to beat the ebay scalpers.supaduper wrote: Tue Nov 20, 2018 8:16 pm That`s a good price Alen for the DB23 pin but unfortunately they only ship within Canada
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time it is unfortunately not possible to white list users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time it is unfortunately not possible to white list users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
The TF330 is here
Moderators: terriblefire, Terriblefire Moderator
Re: The TF330 is here
-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
Build photos
- 05C96F80-704F-4E8B-BFC2-378AEEC2DE7D.jpeg (7.8 MiB) Viewed 5414 times
- 0181CC4A-5AE8-463D-AE54-84F8520B4047.jpeg (3.26 MiB) Viewed 5414 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
Quick note to remember to put the resistor networks on before the 030 socket.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: The TF330 is here
it's here!!!And? How it goes? Is it working ?
Oh..i see, there is no oscillator on it yet..
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
There are a lot of things I need to check. The ram and the 100Mhz crystal is last on the list to add. Will be a week before I get this up and running. First thing I need to do is check I can disable the onboard cpu properly
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: The TF330 is here
Some old (A2k) accelerator cards have "Boss" jumper on them, shorting it onboard CPU gets disabled, don't know how it is routed though.. 
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
The solution I need is either to hold HALT low forever or BG low forever. I don’t know which will work on the CD32 because it depends what else is wired to those lines.
I have a plan. I just need to run through it
I have a plan. I just need to run through it
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
Just booted the 030 at 14mhz. No ram or IDE yet.
Good news is no patches are needed for my 020 turn off mode. Yay.
Good news is no patches are needed for my 020 turn off mode. Yay.
- F065C043-5D0E-4398-9F2F-55A363C5C1E6.jpeg (2.81 MiB) Viewed 5342 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: The TF330 is here
Oh my giddy aunt it lives! 
great work mate
great work mate-
terriblefire
- Admin sponsor
- Posts: 5666
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: The TF330 is here
IDE up and running too
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."