You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Terriblefire Accelerators
Moderators: terriblefire, Terriblefire Moderator
-
supaduper
- Site sponsor
- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: Terriblefire Accelerators
Steve are you going with 10uf caps (1206 package) and 0.1uf caps ( 0603 package ) on this badger :)
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire Accelerators
Yeah. I strongly recommend multilayer caps ... especially for the SDRAM.supaduper wrote: 11 Nov 2018 18:41 Steve are you going with 10uf caps (1206 package) and 0.1uf caps ( 0603 package ) on this badger :)
Its gonna be fun. Now we need someone to setup a wireless WHDLoad server :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Terriblefire Accelerators
TF53x with SDRAM will be a pain in the @ss,
unless You'll go beyond 100x100mm... :roll:
There isn't much free space for level shifters..
Maybe it is possible to use one big cpld instead of two smaller? :geek:
unless You'll go beyond 100x100mm... :roll:
There isn't much free space for level shifters..
Maybe it is possible to use one big cpld instead of two smaller? :geek:
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire Accelerators
But the chipcount will go from 4 to 2 so that will help. it will need more than 10x10cm.. but thats the long term plan.8 Bit Dreams wrote: 11 Nov 2018 18:59 TF53x with SDRAM will be a pain in the @ss,
unless You'll go beyond 100x100mm... :roll:
There isn't much free space for level shifters..
Maybe it is possible to use one big cpld instead of two smaller? :geek:
Using a single CPLD wont help because the bus cpld doesnt take up any space that could be reused.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Terriblefire Accelerators
Right, there will be only 2 chips instread of 4,
maybe You can relocate IDE to the right side instread of front this time, this will make it more A2000 friendly (TF530 and TF534 has IDE port in front now), also A500 will profit if ide will be on the right side (maybe we can use TF53X without relocator then)..
As about A1200:
Edu got connectors already, i am pretty sure he will be very interested!
maybe You can relocate IDE to the right side instread of front this time, this will make it more A2000 friendly (TF530 and TF534 has IDE port in front now), also A500 will profit if ide will be on the right side (maybe we can use TF53X without relocator then)..
As about A1200:
Edu got connectors already, i am pretty sure he will be very interested!
Retro computer hardware & repair in Germany
-
alenppc
- Moderator Team
- Posts: 932
- Joined: 08 Nov 2018 12:59
Re: Terriblefire Accelerators
WHOA! This was so unexpected. All secretly routed already. Crazy!
Expect 68030 prices to skyrocket now. Thank you for getting rid of the FPU btw, that’ll save us some trouble!
Expect 68030 prices to skyrocket now. Thank you for getting rid of the FPU btw, that’ll save us some trouble!
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Terriblefire Accelerators
Yeah...FPU is pretty useless :P
Haven't turned on my A1200 for a year :lol: :lol: :lol:
It screams for more memory, lol
Haven't turned on my A1200 for a year :lol: :lol: :lol:
It screams for more memory, lol
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire Accelerators
Edu will likely add it back in on the A1200 version of the TF330.8 Bit Dreams wrote: 11 Nov 2018 19:41 Yeah...FPU is pretty useless :P
Haven't turned on my A1200 for a year :lol: :lol: :lol:
It screams for more memory, lol
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire Accelerators
Ok. General temperature taking here.
Do i release the TF534 to the general public or hold off until we see what happens with the SDRAM experiment?
I'm torn.
Do i release the TF534 to the general public or hold off until we see what happens with the SDRAM experiment?
I'm torn.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Terriblefire Accelerators
Sure Stephen!
Let it go! TF534 deserves a chance to live!
Let it go! TF534 deserves a chance to live!
Retro computer hardware & repair in Germany
Who is online
Users browsing this forum: CCBot and 58 guests