You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Sandord - progress

Where Alpha builders can post pics and progress etc
User avatar
PhilC
Moderator
Moderator
Posts: 7414
Joined: 23 Mar 2018 20:22

Re: Sandord - progress

Post by PhilC »

No fair, you've had more fun fitting extra bodge wires :-)
If it ain't broke, test it to Destruction.
Top
User avatar
sandord
Posts: 763
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: Sandord - progress

Post by sandord »

Forgottenmyname wrote: 29 Nov 2018 22:12 No fair, you've had more fun fitting extra bodge wires :-)
I don't get it...
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7414
Joined: 23 Mar 2018 20:22

Re: Sandord - progress

Post by PhilC »

sandord wrote: 29 Nov 2018 22:16
Forgottenmyname wrote: 29 Nov 2018 22:12 No fair, you've had more fun fitting extra bodge wires :-)
I don't get it...

Its supposed to be fun fitting the fixes.....
If it ain't broke, test it to Destruction.
Top
User avatar
sandord
Posts: 763
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: Sandord - progress

Post by sandord »

Forgottenmyname wrote: 29 Nov 2018 22:16 Its supposed to be fun fitting the fixes.....
Ah, well it is :lol:
Top
User avatar
sandord
Posts: 763
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: Sandord - progress

Post by sandord »

For those who haven't done the un-f*ck boards and don't have really long pin headers (which you need to rise the boards above the main board for at least 10mm): https://www.pollin.de/p/stiftleiste-2x20-451983
Top
User avatar
sandord
Posts: 763
Joined: 13 Aug 2018 22:08
Location: The Netherlands

Re: Sandord - progress

Post by sandord »

sandord wrote: 05 Dec 2018 23:58 For those who haven't done the un-f*ck boards and don't have really long pin headers (which you need to rise the boards above the main board for at least 10mm): https://www.pollin.de/p/stiftleiste-2x20-451983
Hmm, I was too quick (as usual), these are double rowed so probably not very handy for this purpose because you'd need to split them. :oops:
Top

Return to “ALPHA USER BUILDS”

Who is online

Users browsing this forum: CCBot and 41 guests