:lolbig: :stars: :excited:JezC wrote: 24 Mar 2023 21:51 Now, if that was shades of pink rather than purple, you might have @exxos claiming that for his own! ;)
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
stween's build
-
stephen_usher
- Site sponsor
- Posts: 7367
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: stween's build
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
Icky
- Site Admin
- Posts: 4365
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: stween's build
And we are booting properly. Along with all the changes the SIMM slot replacement brought this board to life. The purple colour video in the previous post was a combination of the DAC jumpers and my RGB cable setup.
Now to start tidying and placing components back on the board.
Now to start tidying and placing components back on the board.
You do not have the required permissions to view the files attached to this post.
-
PhilC
- Moderator
- Posts: 7434
- Joined: 23 Mar 2018 20:22
Re: stween's build
@Icky nice to see it up and running at last, although I did prefer the purple :D
If it ain't broke, test it to Destruction.
-
exxos
- Site Admin
- Posts: 28258
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: stween's build
Another H5 joins the land of the living :yay2: :dualthumbup:
-
stephen_usher
- Site sponsor
- Posts: 7367
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: stween's build
Good-oh!
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
Icky
- Site Admin
- Posts: 4365
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: stween's build
Everything is back in place and cleaned up. I have added in a few sockets and headers, plus I have several battery cell holders and a crystal for the RTC clock circuit so put them in. @stween you only need to find the RTC chip.
First patches in place with the inductors on the 3V3 <-> 5V translators replaced with 220K resistors is done. Now to do the rest such as the audio fixes.
First patches in place with the inductors on the 3V3 <-> 5V translators replaced with 220K resistors is done. Now to do the rest such as the audio fixes.
You do not have the required permissions to view the files attached to this post.
-
stween
- Site sponsor
- Posts: 282
- Joined: 08 Sep 2018 15:10
- Location: Brooklyn & Edinburgh
Re: stween's build
Wonderfully good! I'm looking forward to getting my board through a full boot cycle for the first time :D
-
Icky
- Site Admin
- Posts: 4365
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: stween's build
Yes, when you get this running we need to see your favourite game demoed :)stween wrote: 01 Apr 2023 15:09 Wonderfully good! I'm looking forward to getting my board through a full boot cycle for the first time :D
-
Icky
- Site Admin
- Posts: 4365
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: stween's build
Listing all the fixes going onto the board and status:
- COMPLETE - H5 C1 3.3v bus fix
- COMPLETE - H5 C1 YM AUDIO FIX
- COMPLETE - C1 AUDIO FIX - FLOPPY NOISE ISSUES
- COMPLETE - 32Mhz OSC fix.
- COMPLETE - H4 & H5 series BGACK pullup update fix
-
Icky
- Site Admin
- Posts: 4365
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: stween's build
Board has been on GEMBench loop for over 24 hours now and no glitches so I deem that as a working board. Just need to test out the audio patches work.
Who is online
Users browsing this forum: CCBot and 2 guests