exxos blog - random goings on

[exxos]

It's that time of the year where my chair snaps in half! FFS!!

IMG_0176.JPG (158.13 KiB) Viewed 1575 times

[exxos]

So which bit broke first... ?

IMG_0179.JPG (284.38 KiB) Viewed 1563 times

IMG_0178.JPG (377.69 KiB) Viewed 1563 times

[PhilC]

I don't care which bit broke first, I'm more happy to see a half brick in your tool set

[exxos]

I don't care which bit broke first, I'm more happy to see a half brick in your tool set

Bricks are very useful

[exxos]

Managed to find a supposed compatible piston as mine snapped in half.

Still need to get the black bit off the end yet. Might try setting fire to it. Ignite the gas in the piston and resulting explosion frees the stuck bit off..

[exxos]

The chair repair started.

Will just be lazy and dump these images as I am knelt down on the floor which is not comfortable

Basically it was heating up the black part on the end to get it off. The black plastic melted and caught fire. Still burning half an hour later!! grinding off all the black paint off all the metalwork and then finally welding the stuff.

Also did a quick video of the gas piston "exploding". This made me jump Followed by fire and a spot of vintage welding at the end.. I was probably on fire as well at some point.

IMG_0180.JPG (428.75 KiB) Viewed 1511 times

IMG_0182.JPG (178.77 KiB) Viewed 1511 times

IMG_0183.JPG (165.73 KiB) Viewed 1511 times

IMG_0187.JPG (332.43 KiB) Viewed 1511 times

IMG_0189.JPG (205.75 KiB) Viewed 1511 times

IMG_0191.JPG (357.79 KiB) Viewed 1511 times

IMG_0192.JPG (268.77 KiB) Viewed 1511 times

IMG_0193.JPG (217.89 KiB) Viewed 1511 times

IMG_0194.JPG (326.71 KiB) Viewed 1511 times

IMG_0195.JPG (354.7 KiB) Viewed 1511 times

IMG_0196.JPG (458 KiB) Viewed 1511 times

IMG_0197.JPG (427.5 KiB) Viewed 1511 times

IMG_0198.JPG (419.57 KiB) Viewed 1511 times

IMG_0199.JPG (448.74 KiB) Viewed 1511 times

IMG_0200.JPG (388.86 KiB) Viewed 1511 times

IMG_0201.JPG (441.98 KiB) Viewed 1511 times

IMG_0203.JPG (372.93 KiB) Viewed 1511 times

[mrbombermillzy]

The first glance of this post, reading:

The chair repair started.

...and then seeing a YT video with flames underneath was too much and it had me in fits of laughter.

A normal/sane person would really wonder how a chair repair would in any way involve the chair exploding/catching fire.

You've made my day right here!

[PhilC]

If only it wasn’t filled with gas and oil

[Cosmic Puppet]

Model is MPF82E. You just need a USB cable for them.

Thanks. Yeah that's one of the drives I ordered and a 88E. If they work well, I'll see if I an source a few for my store. I did find a new one but knocking £100

Going to dismantle one and see what custom crap is on the PCB so I can't clone it..

This is what's inside:

20210415_165932.jpg (240.95 KiB) Viewed 1485 times

p.s. It's not giving me the option to rotate it. (Done it for you, PhilC)

[exxos]

This is what's inside:

Ah cool. Rehashed Sony drive then really in a silly housing.